We are sorry, This PDF is available in download format only

® Intel 82562V 10/100 Mbps Platform LAN Connect

Product Features Datasheet n IEEE 802.3 10BASE-T/100BASE-TX n Diagnostic loopback mode compliant physical layer interface n 1:1 transmit transformer ratio support n IEEE 802.3u Auto-Negotiation support n Low power (less than 300 mW in active n Digital Adaptive Equalization control transmit mode) n Link status interrupt capability n Reduced power in “unplugged mode” (less than 50 mW) n XOR tree mode support n Automatic detection of “unplugged mode” n 3-port LED support (speed, link and activity) n 3.3 V device n 10BASE-T auto-polarity correction n 81-pin Mold Cap package--10mm x 10mm x 1.745mm; 0.635mm Ball, 1.0mm Pitch n LAN Connect Interface n PHY detects polarity, MDI-X, and cable lengths. Auto MDI, MDIX crossover at all speeds Additional Features n The 82562V PLC supports strapping options that enable the following operating modes: —LED support for three logic configurations. —LAN disable function using one pin. —Increased transmit strength. n The receive BER performance increases the margin for cable length. n Return Loss performance is improved. Revision 1.00 January 2006 317757-001 Revision History Revision 0.25 0.50 1.00 Revision Date July 2005 October 2005 January 2006 Description Initial release. Added correct package information and added more pin names and numbers Updated the power values and the signal names list Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel® products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice. Designers must not rely on the absence or characteristics of any features or instructions marked "reserved" or "undefined." Intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. The 82562V PLC may contain design defects or errors known as errata which may cause the product to deviate from published specifications. Current characterized errata are available on request. Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order. Copies of documents which have an ordering number and are referenced in this document, or other Intel literature may be obtained by calling 1-800-548-4725 or by visiting Intel's website at http://www.intel.com. Intel® is a trademark or registered trademark of Intel Corporation or its subsidiaries in the United States and other countries. Copyright © 2005-2006, Intel Corporation * Other brands and names are the property of their respective owners. Datasheet 1.0 1.1 1.2 1.3 Networking Silicon— 82562V Introduction ® This document is applicable to the Intel 82562V 10/100 Mbps Platform LAN Connect Read the full ® Intel 82562V 10/100 Mbps Platform LAN Connect.

Related Videos