Firmware Package for Intel® RAID Module RMS3CC080, RMS3CC040 and Intel® RAID Adapter RS3DC080, RS3DC040, RS3SC008, RS3MC044

17755
1/31/2018

Introduction

Flash update version 24.21.0-0067 for Windows*, Linux*, and UEFI.

Available Downloads

  • OS Independent
  • Size: 4.9 MB
  • SHA1: 6B5AB387CDF3D6EE99A06CC75156C079E6536510

Detailed Description

==========================
Supported RAID Controllers
==========================
This download supports Intel(R) RAID controllers using MR software stack (RMS3CC080, RMS3CC040, RS3MC044, RS3SC008, RS3DC080, RS3DC040)


===================
Package Information
===================
Flash package = v24.21.0-0067

==========
Attention!
==========
Intel recommends to loading Factory Default setting after the firmware upgrade which will not affect data on any existing array. To do so:
1. Reboot the system and login to the RAID BIOS Console.
2. Select the controller and select 'Adapter Properties'->'Next'
3. Set the 'Set Factory Defaults' setting to 'Yes' and submit the change.
4. Reboot the system (the default settings are applied).
5. Re-configure to the desired settings in RAID Web Console2.

---------------------------------------
Firmware downgrade notice
---------------------------------------
Intel does not recommend to downgrade the factory installed firmware on your RAID module or controller, it has important enhancements and bug fixes you may lose when going to a previous version.
If you need to install an older firmware version, please contact Intel for instructions on how to perform this action.


==================
Known Restrictions
==================
1) This download does NOT support EFI v1.1 environment. Please use the EFI shell command “ver" which will display the EFI version, to identify the EFI version.
2) When 2 or more VDs are created, VD cache settings must be the same.