Non-Volatile Memory (NVM) Update Utility for Intel® Ethernet Adapters 700 Series—EFI

18639
3/18/2019

Introduction

This download record contains all files required to update the Non-Volatile Memory (NVM) update utility for Intel® Ethernet Adapters 710 Series for EFI. (6.80)

Available Downloads

  • OS Independent
  • Size: 35.7 MB
  • SHA1: 6743E3E8A99DEE7307475E3BB41EBD1664899382

Detailed Description

Overview

NVM update to version 6.80 with release 23.4 includes Recovery Mode.

Note: NVM 6.01 can be used with 23.4 SW Release.

Installation uses normal upgrade installation procedures.

  • Normal NVM Upgrade (Intel® Ethernet NVM Update Tool) can be used to enable the new features.
  • Reboot required. A/C power cycle is not required when updating from the previously released version. Intel recommends following the instructions provided with the NVM Update tool.
  • NVM update to version x.x enables anti-rollback mode. After upgrading, downgrade to previous NVM versions isn't possible.

Note: The design of Recovery Mode precludes rollback to prior versions of the NVM. This is because the addition of the Recovery Mode capability changed the definition of some regions of the NVM to be write-protected. Rollback to a prior version requires access to these write-protected regions, and therefore, the rollback would fail.

  • Recovery Mode has no impact to normal operation.
  • To fully support Recovery Mode, the updated Ethernet NVM, software driver, and software tool in Release 23.4 or later must all be used.

This package contains all files required to update the non-volatile memory (NVM) on the Intel® Ethernet Adapters in your system. It contains the NVM Update Utility for EFI, configuration file, updated NVM binaries, and required driver files.

See the readme file for more information, such as limitations and prerequisites, UEFI requirements, and how to use a script.

Related topic