Intel® Server Board S2600BP Family BIOS and Firmware Update for Intel® One Boot Flash Update (Intel® OFU) and WinPE*

19024
1/27/2020

Introduction

This download contains the System Update Package for the Intel® Server Board S2600BP Family for Intel® OFU Utility and WinPE*, read firmware dependencies in requirements section.

Available Downloads

  • OS Independent
  • Size: 33.9 MB
  • SHA1: FDB9D4089BC27C04BB357F49B6FB5C87E69E3F8F

Detailed Description

Attention:

Do NOT use this OS-based Software Update Package (SUP) if the system is an Intel® Data Center Block for Nutanix* Enterprise Cloud, the said system relies on Nutanix’s Prism Life Cycle Manager for any firmware updates. For more information, visit Nutanix* Life Cycle Manager page. For a list of hardware and firmware compatibility, visit the Nutanix* Hardware and Firmware compatibility page.

Firmware requirements
To update the system firmware stack to the versions included in this update package, the currently loaded system firmware stack on the system must meet the following:

  • System BIOS - 02.01.0009
  • ME Firmware - 04.01.04.323
  • BMC Firmware - 2.22.59c3b83a
  • FRUSDR - 1.41

Failure to get to the required firmware stack, may cause unexpected results.

Overview

This download contains the BIOS and firmware update package for the Intel® Server Board S2600BP Family for Intel® One Boot Flash Update (Intel® OFU) Utility and Windows* Preboot Execution Environment (WinPE*).

You can use this package to update the BIOS, BMC, ME, FD, and DCPMM DIMMs.

Purpose

This Firmware Update Package supports 1st and 2nd generation Intel® Xeon® Scalable Processor families.

This update package includes the following production-level system firmware updates:

  • BIOS: 02.01.0010
  • ME: 04.01.04.339
  • BMC: 2.37.1f190479
  • FRUSDR: 1.43
  • DCPMM: 1.2.0.5417

View firmware updates and troubleshooting tips.

Additional notes

  • Refer first to the Release Notes for detailed information on installation instructions, supported hardware, what's new, bug fixes, and known issues before starting the firmware update.
  • You must install this update package using Intel® One Boot Flash Update (Intel® OFU) v14.1 build 19 or later.