Firmware Package for Intel® RAID Module RMSP3CD080F, RMSP3HD080E and Intel® RAID Adapter RSP3TD160F, RSP3MD088F, RSP3DD080F, RSP3WD080E

19043
3/30/2020

Introduction

This record provides the Trimode RAID firmware package version 50.8.0-2857 - MR7.8p1.

Available Downloads

  • OS Independent
  • Size: 18.8 MB
  • SHA1: 1C688FEA7220CED970AEFD1D3ED87B68FA803BCB

Detailed Description

Purpose

This download supports Intel® 34xx/35xx RAID controllers using MR software stack (RMSP3CD080F, RMSP3HD080E, RSP3TD160F, RSP3MD088F, RSP3DD080F, RSP3WD080E.

Package information

Firmware Package: 50.8.0-2857 (MR 7.8p1)
Firmware 5.080.00-2758

Important note

Intel recommends loading the Factory Default setting after the firmware upgrade, which doesn't affect data on any existing array.

To do so:

  1. Reboot the system and log in to the Intel® RAID BIOS Console.
  2. Select the controller and select Adapter Properties->Next.
  3. Set the Set Factory Defaults setting to Yes and submit the change.
  4. Reboot the system (The default settings are applied).
  5. Reconfigure to the desired settings in the Intel® RAID Web Console 3.

Note: If your system uses SAS/SATA expander RES3FV288, RES3TV360, or JBOD2312S3SP.

Update the following before proceeding:

  • Expander FW to B057 revision (or newer)
  • RES3FV288 Expander CPLD to EE revision (or newer)
  • RES3TV360 Expander CPLD to AA revision (or newer)

You can find Expander FW and CPLD here: