Provides the Intel® Server Board M10JNP2SB Firmware Update Package.
- OS Independent
- Size: 65.3 MB
- SHA1: A51D64ECC0F0905C77E4B50D46658E7425078135
This update package includes the following production level firmware updates:
Board BIOS - 7.219
BMC Firmware - 8100.01.11
Firmware update tools
Intel® Server Board M10JNP2SB
IMPORTANT PLEASE READ: Intel has found that when performing an update of the Baseboard Management Controller (BMC) FW using the in-band method (directly from the OS), the update process may hang and fail when updating from FW versions 1.03 and earlier. BMC FW versions 1.06 and later do not present this issue anymore and the BMC FW update in-band method can be used normally. More information please review TA-1157 at intel.com.
IMPORTANT: BMC Flash is only working through FW Update on BMC Web Console method. Please follow instructions of section BMC installation with BMC Web Console.
WARNING: It is very important to follow these instructions as they are written. Failure to update using the proper procedure may cause damage to your system.
Do not modify any of the script files. The scripts as written will provide the most reliable update experience.
To run these updates, you must boot the system to the embedded uEFI shell.
Hardware and firmware requirements
To update the firmware stack to the versions included in this update package, the currently loaded firmware stack on the system must meet the following:
- BIOS with ME update V7.218
Important: to ensure a proper system update, install BIOS updates first, and then install BMC updates
This download is valid for the product(s) listed below.
Product and Performance Information
Intel is in the process of removing non-inclusive language from our current documentation, user interfaces, and code. Please note that retroactive changes are not always possible, and some non-inclusive language may remain in older documentation, user interfaces, and code.