Linux* Driver for Intel® Storage Adapter RS3P4QF160J and RS3P4GF016J

19840
7/30/2021

Introduction

Linux* driver for 2nd Gen Tri-mode Intel Storage Controllers.

Available Downloads

  • Ubuntu Family*, Red Hat Enterprise Linux 7.7*, Red Hat Enterprise Linux 8.3*, SUSE Linux Enterprise Server 15.1*, SUSE Linux Enterprise Server 15*, SUSE Linux Enterprise Server 15 SP2*, Red Hat Enterprise Linux 8.1*, Red Hat Enterprise Linux 7.8*, Red Hat Enterprise Linux 8.2*, SUSE Linux Enterprise Server 12 SP4*, Red Hat Enterprise Linux 7.9*, SUSE Linux Enterprise Server 12 SP3*, Red Hat Enterprise Linux 8*, SUSE Linux Enterprise Server 12 SP5*
  • Size: 61.7 MB
  • SHA1: 23B7408B470514CA684CB312318C6730367DA0B9

Detailed Description

Purpose
Installs Linux* driver for the following Intel® Storage Controller supporting JBOD(Passthrough) only:

  • Intel® Storage Adapter RS3P4QF160J (NVMe+SAS+SATA)
  • Intel® Storage Adapter RS3P4GF016J (SAS+SATA)

Package information
Driver Version = ph18.0-37.00.00.00
Operating System(OS) supported =

  • RHEL* 7 (U7-U9) x64, RHEL* 8 (U1-U3) x64
  • SLES* 12(SP3-SP5) x64, SLES* 15 x64 (GA-U2)
  • Ubuntu* (all releases) x64

Note: The OS must also be supported by the Intel Server board or system the RAID controller is installed on. See the list of supported OS for Intel Server board.

What's new
See the release notes for what's new or fixed, known issues and installation instructions.

This download is valid for the product(s) listed below.