Intel® MAX® 10 - 10M08 Evaluation Kit

With this evaluation board, you can:

• Develop designs for the 10M08S, 144-EQFP FPGA
• Measure FPGA power (VCC_CORE and VCC_IO)
  
• Bridge between different I/O voltages (adjustable VCC_IO on Bank 8)
  
• Read and write to the FPGA’s NOR flash memory
  
• Use the FPGA’s analog-to-digital converter embedded block to measure incoming analog signals
  
• Interface to external functions or devices via Arduino UNO R3 connectors or through-hole vias
  
• Reuse the kit’s PCB board and schematic as a model for your design

Note:

Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.

Evaluation Kit Contents

The Intel® MAX® 10 FPGA – 10M08 Evaluation Kit includes the following:

• CE-compliant Intel® MAX® 10 evaluation board
• Intel® MAX® 10 FPGA (10M08, single power supply, 144-pin EQFP)
  
• Intel® Enpirion® EP5388QI point-of-load, 800 mA, DC-DC step-down (buck) converter with an integrated inductor
  
• JTAG header for download cable programming (POF) or configuration (SOF)
  
• 50 MHz single-ended, external oscillator clock source
  
• Shunt resistors and probe points to measure FPGA power
  
• Switch, push buttons, jumpers, and status LEDs
  
• Connectors:
  
• Arduino headers to accept UNO R3 compatible Shields
• General-purpose through-hole vias
  
• Type mini-B USB connector (power source)
  
• USB cable included
  

• Footprint to install a potentiometer (customer must purchase and install)

• Free Intel® Quartus® Prime Lite Edition software (download and license from website)
• Complete documentation
  
• User manual, bill of materials, schematic, and board files

Note:

¹This kit installation works with Intel® Quartus® Prime design software v14.0.2.