Stratix® V GX FPGA Development Kit

The Stratix® V GX FPGA Development Kit provides a complete design environment that includes all the hardware and software you need to begin developing FPGA designs immediately.

Stratix® V GX FPGA Development Kit

You can use this development kit to do the following:

  • Develop and test PCI Express* (PCIe) designs at data rates up to Gen3. using the PCIe short card form factor-compliant development board
  • Develop and test memory subsystems for DDR3, QDR II+, or RLDRAM II memories.
  • Use the high-speed mezzanine card (HSMC) connectors to interface to one of over 35 different HSMCs provided by partners, supporting protocols, such as Serial RapidIO®, 10 Gbps Ethernet, SONET, CPRI, OBSAI, and others.

Table 1. Stratix® V GX FPGA Development Kit Ordering Information

Ordering Code Find Distributor Ordering Information
DK-DEV-5SGXEA7N Intel® Solutions Marketplace The Stratix® V GX FPGA Development Kit features a 5SGXEA7N device and a one-year license for the Intel® Quartus® Prime design software.
View all Show less
Notes:
Buyer represents that it is a product developer, software developer or system integrator and acknowledges that this product is an evaluation kit that is not FCC authorized, is made available solely for evaluation and software development, and may not be resold.
 
You can purchase optional HSMC connector interface-compatible daughtercards, adapters, or cables to use with your development kit.

Development Kit Contents

The Stratix® V GX FPGA Development Kit features the following:

  • Stratix® V GX FPGA development board (see Figure 1)
  • Featured device:
  • Stratix® V GX FPGA: 5SGXEA7K2F40C2N
  • Configuration, status, and setup elements
  • JTAG
  • On-board USB-BlasterTM II cable
  • Fast passive parallel (FPP) configuration via MAX® V device and flash memory
  • One reset config push button
  • One CPU reset push button
  • Two configuration push buttons
  • Clocks
  • 50 MHz, 125 MHz, 100 MHz, and 148.5 MHz programmable oscillators
  • SMA input (LVPECL)
  • General user input and output
  • 10/100/1000Mbps Ethernet PHY (SGMII) with RJ-45 (copper) connector
  • 16x2 character LCD
  • One 8-position dual in-line package (DIP) switch
  • Sixteen user LEDs
  • Three user push buttons
  • Memory devices
  • DDR3 SDRAM (1,152 MB, x72 bit wide)
  • QDR II+ SRAM (4.5 MB, 2 Mb x18 bit wide)
  • Footprint compatible to QDR II 4 Mb x18 bit wide
  • RLDRAM II (72 MB CIO RLDRAM II with an 18 bit data bus)
  • Component and interfaces
  • PCIe x8 edge connector
  • Two HSMC connectors
  • SMB for serial digital interface (SDI) input and output
  • QSFP optical cage
  • 10/100/1000Mbps Ethernet PHY (SGMII) with RJ-45 (copper) connector
  • Power
  • Laptop DC input
  • PCIe edge connector
  • Nios® II processor web server and remote system update
  • Loopback and debug HSMC cards
  • Power adapter and cables
  • Stratix® V GX FPGA Development Kit software content
  • Complete documentation
  • User guide
  • Reference manual
  • Board schematics and layout design files
  • GUI-based Board Test System
  • Includes complete Intel® Quartus® software projects with open source RTL
  • Board Update Portal
  • Includes complete Intel® Quartus® software projects with open source RTL
  • Intel® Quartus® Prime design software, Development Kit Edition (DKE)
  • License to use full version of Intel® Quartus® Prime design software for one year

Kit Name (Ordering Code)

Document

Description

Version

Stratix® V GX FPGA Development Kit (DK-DEV-5SGXEA7N)

Stratix® V GX FPGA Development Board Reference Manual (PDF) ›

Detailed information about board components and interfaces.

12

 

Stratix® V GX FPGA Development Kit User Guide (PDF) ›

Information about setting up the Stratix® IV GX FPGA development board and using the included software.

12

 

Kit installation › (for boards with ES silicon)

Full installation of all files including reference manual, user guide, quick-start guide, BOM, layout, PCB, schematics, Board Update Portal example file, Board Test System example file, and others.

11.1

 

Kit installation › (for boards with ES silicon)

Full installation of all files including reference manual, user guide, quick-start guide, BOM, layout, PCB, schematics, Board Update Portal example file, Board Test System example file, and others. Contents are updated to Intel® Quartus® II software version 11.1 SP2 with increased DDR3 SDRAM performance and improved transceiver designs. This installation is for ES Boards only.

11.1.2

 

Kit installation ›

Full installation of all files including reference manual, user guide, quick-start guide, BOM, layout, PCB, schematics, Board Update Portal example file, Board Test System example file, and others.

12

 

Kit installation (EXE) ›

(Windows)

Kit installation (ZIP) ›

(Linux)

Full installation of all files including reference manual, user guide, quick-start guide, BOM, layout, PCB, schematics, Board Update Portal example file, Board Test System example file, and others.

13.0.0.0
View all Show less

Additional Resources

Find Boards

Find the right development board for your needs.

Cables and Adapters

Intel® FPGA download cables are available for use in the in-circuit reconfiguration of Intel® FPGAs.

Where to Buy

Contact an Intel® Authorized Distributor today.

Show more Show less
Compare Products