Serial Lite IV Intel® FPGA IP Core

The Serial Lite IV Intel® FPGA Intellectual Property (IP) core is suitable for high-bandwidth data communication for chip-to-chip, board-to-board, and backplane applications.

Read the Serial Lite IV Intel® FPGA IP user guide ›

Serial Lite IV Intel® FPGA IP Core

Serial Lite IV IP core incorporates a media access control (MAC), physical coding sublayer (PCS), and physical media attachment (PMA) block. The IP supports data transfer up to 58 Gbps per lane with a maximum of 12 PAM4 lanes of the Intel® Agilex™ F-tile General-Purpose Transceivers (FGT) and up to 116 Gbps with a maximum of 4 PAM4 lanes of the Intel® Agilex™ F-tile High-Speed Transceivers (FHT) in a single link or 28 Gbps per lane with a maximum of 16 non-return-to-zero (NRZ) lanes of FGT and 58 Gbps per lane with a maximum of 4 NRZ lanes of FHT. This protocol offers high bandwidth, low overhead frames, low I/O count, and supports high scalability in both numbers of lanes and speed. The IP is easily reconfigurable with support of a wide range of data rates with Ethernet PCS mode of the E-Tile transceiver and the F-Tile transceiver.

This IP supports two transmission modes:

  • Basic mode—This is a pure streaming mode where data is sent without the start-of-packet, empty cycle, and end-of-packet to increase bandwidth. The IP takes the first valid data as the start of a burst.
  • Full mode—This is the packet mode of data transfer. A burst and sync cycle is sent at the start and at the end of a packet as delimiters.

Features

Feature Description
Data Transfer
  • Supports up to 116 Gbps per lane with a maximum of 4 PAM4 lanes of FHT in a single link
  • Supports up to 58 Gbps per lane with a maximum of 4 NRZ lanes of FHT in a single link.
  • Supports up to 58 Gbps per lane with a maximum of 12 PAM4 lanes of FGT in a single link.
  • Supports up to 28 Gbps per lane with a maximum of 16 NRZ lanes of FGT in a single link.
  • Supports continuous streaming (Basic) or packet (Full) modes.
  • Supports low overhead frame packets.
  • Supports byte granularity transfer for every burst size.
  • Supports user-initiated or automatic lane alignment.
  • Supports programmable alignment period.
PCS
  • Uses hard IP logic that interfaces seamlessly to Intel® Agilex™ and Intel® Stratix® 10 device E-Tile transceivers for soft logic resource reduction.
  • Supports PAM4 modulation mode for 100GBASE-KP4 specification. RS-FEC is always enabled in this modulation mode.
  • Supports NRZ modulation mode with (optional) KR-FEC error detection and correction.
  • Supports 64b/66b encoding decoding.
Error Detection and Handling
  • Supports cyclic redundancy check (CRC) error checking on transmit (TX) and receive (RX) datapaths.
  • Supports RX link error checking.
  • Supports RX PCS error detection.
Interfaces
  • Supports only full duplex packet transfer with independent links.
  • Uses point-to-point interconnect to multiple FPGAs with low transfer latency.
  • Supports user-defined commands.
View all Show less

IP Status

 
Ordering Status Production
Ordering Codes

Serial Lite III Streaming Intel® FPGA IP

IP-SLITE4
View all Show less

Additional Resources

Find IP

Find the right Intel® FPGA Intellectual Property core for your needs.

Technical Support

For technical support on this IP core, please visit Support Resources or Intel® Premier Support. You may also search for related topics on this function in the Knowledge Center and Communities.

IP Evaluation and Purchase

Evaluation mode and purchasing information for Intel® FPGA Intellectual Property cores.

Designing with Intel® FPGA IP

Learn more about designing with Intel® FPGA IP, a large selection of off-the-shelf cores optimized for Intel® FPGAs.

IP Base Suite

Free Intel FPGA IP Core licenses with an active license for Intel® Quartus® Prime Standard or Pro Edition Software.

I-Tested

Intel awards the interoperability-tested or I-Tested certification to verified Intel FPGA IP or Intel FPGA Design Solutions Network member IP cores.

Intel® FPGA Partner IP

Browse catalog of Intel® FPGA partner intellectual property cores in the Intel® Solutions Marketplace.

Design Examples

Download design examples and reference designs for Intel® FPGA devices.

IP Certifications

Intel is committed to providing Intellectual Property cores that work seamlessly with Intel® FPGA tools or interface specifications.

Contact Sales

Get in touch with sales for your Intel® FPGA product design and acceleration needs.

Show more Show less
Compare Products