Report Datasheet Command

Generates the Datasheet Report that summarizes the following timing characteristics of the design as a whole:

• Setup Times(tsu (clock setup time))
• Hold Times(th (clock hold time) Definition)
• Clock to Output Times(tco (clock to output delay) Definition)
• Minimum Clock to Output Times(Minimum tco (clock to output delay) Definition)
• Propagation Delay(tpd (pin-to-pin delay) Definition)
• Minimum Propagation Delay(Minimum tpd (pin-to-pin delay) Definition)
• Output Enable Times
• Minimum Output Enable Times
• Output Disable Times
• Minimum Output Disable Times

The report lists delays for each relevant clock or port. If there are multiple paths for a clock (for example, multiplexed clocks), then the maximum delay of the longest path is taken for t_H and t_CO, and the minimum delay of the shortest path is taken for t_SU and minimum t_CO. If there are multiple paths for a data port, then the maximum delay of the longest path is used for t_SU, t_CO, and t_PD; and the minimum delay of the shortest path is used for t_H , minimum t_CO, and minimum t_PD.