report_pipelining_info (::quartus::sta)
The following table displays information for the report_pipelining_info Tcl command:
Tcl Package and Version |
Belongs to ::quartus::sta 1.0 |
|||
Syntax | report_pipelining_info [-h | -help] [-long_help] [-append] [-bus_name <names> ] [-file <name> ] [-max_rows <number> ] [-min_depth <number> ] [-min_width <number> ] [-panel_name <name> ] [-stdout] | |||
Arguments | -h | -help | Short help | ||
-long_help | Long help with examples and possible return values | |||
-append | If output is sent to a file, this option appends the result to that file. Otherwise, the file is overwritten. This option is not supported for HTML files. | |||
-bus_name <names> | When set, pipelining report gives detailed information on the specific bus | |||
-file <name> | Sends the results to an ASCII or HTML file. Depending on the extension | |||
-max_rows <number> | Specifies the maximum number of rows to report | |||
-min_depth <number> | Specifies the minimum average bus depth | |||
-min_width <number> | Specifies the minimum bus width | |||
-panel_name <name> | Sends the results to the panel and specifies the name of the new panel | |||
-stdout | Send output to stdout, via messages. You only need to use this option if you have selected another output format, such as a file, and would also like to receive messages. | |||
Description |
This command reports back-to-back pipelining registers information and collapses pipelining chains based on which bus they are in. Use the "-min_depth" option to specify the minimum average depths of pipelining buses to report. The default value for this field is "3". Use the "-min_width" option to specify the minimum width of pipelining buses to report. The default value for this field is "16". By default, the command reports all of the pipelining buses with average depth and width over the value specified by "-min_depth" and "-min_width" options. To help check one pipelining bus in detail, this command also provides detailed mode. Use the "bus_name" to specify which bus to focus. |
|||
Example Usage |
This command currently contains no example usage. |
|||
Return Value | Code Name | Code | String Return | |
TCL_OK | 0 | INFO: Operation successful |