String Length Example for Intel® Edison Board


Install & Setup



This example determines the string length. There is no circuit required for this example. The example continues to add to the previous string.


  • Intel® Edison compute module
  • Arduino* expansion board


  1. Connect the power supply and the USB to USB port on the Arduino expansion board.
  2. Open Arduino IDE. Click Tools > Board and select Intel® Edison.
  3. Click Tools > Serial Port and select the Com # that the Intel® Edison Board is connected to.
  4. Click File > Examples > 08.StringLength.
  5. Click upload icon.
  6. Open the Serial Monitor to input a string.
  7. Input any string.

No Circuit Needed


No circuit needed

Note This image was created using Fritzing*.