Using Fast Boot in Intel® Visual BIOS

Documentation

Maintenance & Performance

000006699

01/26/2024

Fast Boot is a feature in BIOS that reduces your computer boot time. If Fast Boot is enabled:

  • Boot from Network, Optical, and Removable Devices are disabled.
  • Video and USB devices (keyboard, mouse, drives) won't be available until the operating system loads.
Caution
When Fast Boot is enabled, these problems can occur:
  • You can't access BIOS Setup during boot with the F2 key.
  • You can't boot to an optical drive or USB drive to install an operating system.
  • You can't boot to a network.
  • Wake System from S5 option won't work.

The steps to enable and recover Fast Boot depend on the version of the Intel Visual BIOS on the Intel NUC. See the table to find out which Intel Visual BIOS is supported on your Intel NUC.

Fast Boot in Intel® Visual BIOS 3.x Included with the following Intel NUCs only:
  • Intel® NUC 8 Mainstream-G NUC8i7INH
  • Intel® NUC 8 Mainstream-G NUC8i5INH
Fast Boot in Intel® Visual BIOS 2.x

Included with all other Intel NUC models except first generation Intel NUCs (listed below).

Fast Boot in Intel® Visual BIOS 1.x Included with first generation Intel NUCs:
  • Intel® NUC Kit DC53427HYE
  • Intel® NUC Kit DCCP847DYE
  • Intel® NUC Kit DC3217IYE
  • Intel® NUC Kit DC3217BY
  • Intel® NUC Board D53427RKE
  • Intel® NUC Board DCP847SKE
  • Intel® NUC Board D33217GKE
  • Intel® NUC Board D33217CK

Click or the topic for details:

Enable Fast Boot in Intel Visual BIOS 3.x
  1. Press F2 during boot to enter the BIOS setup.
  2. Go to the Boot > Boot Priority tab.
  3. Enable the Fast Boot setting.
  4. Press F10 to save and exit.
Fast Boot recovery in Intel Visual BIOS 3.x If the previous boot failed during POST:
  • Fast Boot is automatically disabled in the next boot and this message is displayed: The previous boot attempt failed. Would you like to restore Fast Boot on the next boot? (Y/N).
If the boot fails after POST:
  • No message displays, and Fast Boot is still active.

Disable Fast Boot from the power button menu

You can use the power button to recover if you encounter Fast Boot problems. Access the power button menu with this sequence:
  1. Make sure the system is off, and not in Hibernate (S4) or Sleep (S3) mode.
  2. Press the power button and hold it down for three seconds. Then, release it before the 4-second shutdown override.
  3. The power button menu is displayed.

    Power button menu displays

  4. Press F3 to disable Fast Boot. (This option appears in the menu only when Fast Boot is enabled.)
Enable Fast Boot in Intel Visual BIOS 2.x
  1. Press F2 during boot to enter the BIOS setup.
  2. Go to the Advanced menu > Boot > Boot Configuration tab.
  3. Enable the Fast Boot setting.
  4. Press F10 to save and exit.
Fast Boot recovery in Intel Visual BIOS 2.x If the previous boot failed during POST:
  • Fast Boot is automatically disabled in the next boot and this message is displayed: The previous boot attempt failed. Would you like to restore Fast Boot on the next boot? (Y/N).
If the boot fails after POST:
  • No message displays, and Fast Boot is still active.

Disable Fast Boot from the power button menu

You can use the power button to recover if you encounter Fast Boot problems. Access the power button menu with this sequence:
  1. Make sure the system is off, and not in Hibernate (S4) or Sleep (S3) mode.
  2. Press the power button and hold it down for three seconds. Then, release it before the 4-second shutdown override.
  3. The power button menu is displayed.

    Power button menu displays

  1. Press F3 to disable Fast Boot. (This option appears in the menu only when Fast Boot is enabled.)
Enable Fast Boot in Intel Visual BIOS 1.x
  1. Press F2 during boot to enter the BIOS setup.
  2. Go to the Advanced menu -> Boot tab.
  3. Enable any, or all, of the three Fast Boot options:
    • General Optimization
    • USB Optimization
    • Video Optimization
  4. Press F10 to Save and Exit.
Setting Description
General Optimization If you enable General Optimization, the system boots faster because the following features are disabled:
  • Boot to Network
  • Boot to Optical Devices
  • Boot to Removable Devices
USB Optimization If you enable USB Optimization, all USB devices will be unavailable until after the operating system boots but the system will boot faster.

USB Optimization can't be enabled if a User Password or Hard Drive Password is installed.

Caution
Enabling this feature prevents you from using a USB keyboard to enter BIOS setup. Unplug the computer to temporarily disable this feature. The USB optimization feature will be disabled for the first boot after restoring power to the system.
Video Optimization If you enable Video Optimization, the BIOS displays text only and not a custom logo. However, the system boots faster. If disabled, the BIOS displays the logo and boots slower. This doesn't affect video capabilities after the operating system boots.
Fast Boot recovery in Intel Visual BIOS 1.x

The BIOS detects if previous boot was unsuccessful. When the computer is booted, if the previous boot failed during POST, Fast Boot is disabled and the following message displays:

The previous boot attempt failed. Would you like to restore Fast Boot on the next boot? (Y/N).

If the boot attempt fails after POST, no message displays, and Fast Boot is still active.

Power button recovery

The power button can be used to recover if you encounter Fast Boot problems.

  • From a powered off state, press and hold the power button for about two seconds. Then, release it when you hear three short beeps.
  • The BIOS follows a normal boot path, as if Fast Boot is disabled.
  • If Fast Boot is enabled, the following message displays: Fast Boot failsafe trigger was detected. Would you like to restore Fast Boot on the next boot? (Y/N).

Maintenance mode

To enter Maintenance mode:

  1. Locate the BIOS configuration jumper. See the Technical Product Specification.
  2. Move the jumper from Pins 1-2 to Pins 2-3.
  3. Turn on the system. The system boots directly into the BIOS in Maintenance mode, where you can turn off Fast Boot if needed.

jumper on Pins 2-3

Note on A/C power loss

If Fast Boot is enabled and your system loses A/C power during the POST process:

  • The computer will detect the A/C power loss on the next boot.
  • This message displays: The previous boot attempt failed. Would you like to restore Fast Boot on the next boot? (Y/N).
Related topic
Find technical specifications