Article ID: 000074680 Content Type: Troubleshooting Last Reviewed: 11/03/2015

Why have the Arria 10 External Memory Interfaces IP Slew Rate parameters been removed in the Quartus Prime software version 15.1 ?

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

The Slew Rate parameters in the Board Timing tab have been removed in the Quartus® Prime software version 15.1 as they are not required when the Intersymbol Interference/Crosstalk parameters are determined by the correct simulation flow. This is detailed in the following link : 

Arria_10_EMIF_Simulation_Guidance

Related Products

This article applies to 3 products

Intel® Arria® 10 GT FPGA
Intel® Arria® 10 GX FPGA
Intel® Arria® 10 SX SoC FPGA