Article ID: 000077445 Content Type: Troubleshooting Last Reviewed: 06/17/2023

Why aren’t the tx_polinv and rx_polinv ports available when using the transceiver Native PHY IP for Intel® Arria® 10 and Intel® Cyclone®10 devices in Enhanced PCS mode?

Environment

  • Intel® Quartus® Prime Pro Edition
  • Transceiver Native PHY Intel® Arria® 10 Cyclone® 10 FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    The transceiver Native PHY Intel® Arria® 10 and Intel® Cyclone® 10 FPGA IP in Enhanced PCS mode does not have tx_polinv and rx_polinv ports. 

    Resolution

    You can use the Gearbox Enable RX data polarity inversion and Enable TX data polarity inversion settings to implement static polarity inversion. 

    You can implement dynamic polarity inversion by reconfiguring the PHY with different Gearbox Enable RX data polarity inversion and Enable TX data polarity inversion settings.

    Related Products

    This article applies to 2 products

    Intel® Cyclone® 10 FPGAs
    Intel® Arria® 10 FPGAs and SoC FPGAs