Article ID: 000078314 Content Type: Error Messages Last Reviewed: 09/11/2012

Error: Parameter user_offset_enable is not supported for WYSIWYG primitive "sdl"

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

You may see this error in the Quartus® II software version 9.0 SP2 and earlier for designs targeting Stratix® IV devices when using the ALTTEMP_SENSE megafunction.

This problem only affects ALTTEMP_SENSE megafunction variation files generated in VHDL.

To work around this problem, perform either of the following steps:

  • Regenerate the ALTTEMP_SENSE megafunction variation file in Verilog HDL, which is unaffected by this problem
  • Comment out line 73 from the ALTTEMP_SENSE megafunction VHDL variation file (.vhd)
    user_offset_enable : STRING := "off";

This problem is fixed beginning with the Quartus II software version 10.0.

Related Products

This article applies to 3 products

Stratix® IV GT FPGA
Stratix® IV GX FPGA
Stratix® IV E FPGA