Article ID: 000080952 Content Type: Error Messages Last Reviewed: 07/16/2020

Error(332000): ERROR: Argument <node_object> gives an object that is not of node, kpr, port, reg, pin, net or comb type. Specify one that gives an object of required type.

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the  Intel® Quartus® Prime Pro Edition software version 20.1, you may see this error message when your design has the next three conditions:

    • The design has an instance of the Signal Tap logic analyzer or the In-System Sources and Probes with synchronous transfers.
    • A clock port in the design is named using the following naming convention clk_<digits>. For example: clk_100.
    • The number of clocks in the design is greater than the value represented by <digits>.
    Resolution

     

    To avoid this problem, verify the names used in the design for the clock ports and avoid a naming convention as clk_<digits>.

    This problem is fixed starting with the Intel® Quartus® Prime Pro Edition software version 20.2.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 GX FPGA