Article ID: 000083447 Content Type: Troubleshooting Last Reviewed: 09/11/2012

User Guide: External DDR Memory PHY Interface Megafunction User Guide (ALTMEMPHY) --> Errata

Environment

BUILT IN - ARTICLE INTRO SECOND COMPONENT
Description

10001846, Chapter 3 "Specifications", Table 3-2, Version 4.1.

 

phy_clk_1x phase shift specification has been updated. Stratix® III PLL outputs table incorrectly states that the phase shift of phy_clk_1x out of the PLL counter C0 has a phase shift of 0 Degrees. The correct phase shift for phy_clk_1x implemented by the IP Toolbench is 30 Degrees.

The next revision of the user guide will include this updated specification.

Related Products

This article applies to 1 products

Stratix® III FPGAs