Article ID: 000086298 Content Type: Troubleshooting Last Reviewed: 01/03/2023

Why is SmartVID shown as an VCCL_HPS option for the Hard Processor System Intel® Stratix® 10 FPGA IP on Intel® Stratix® 10 SoC Low Power devices?

Environment

  • Intel® Quartus® Prime Pro Edition
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in the Intel® Quartus® Prime Pro Edition Software version 18.1, the IP parameter editor GUI incorrectly shows the SmartVID option for VCCL_HPS on Hard Processor System Intel® Stratix® 10 FPGA IP ->Internal Clocks and Output Clocks ->VCCL_HPS Value. The Intel® Stratix® 10 SoC Low Power device(-L) doesn’t support SmartVID. 

    Resolution

    To work around the problem, select 0.9V or 0.94V in the Hard Processor System Intel® Stratix® 10 FPGA IP -> Internal Clocks and Output Clocks ->VCCL_HPS Value option, when using the Intel® Stratix® 10 SoC Low Power device.

    Related Products

    This article applies to 1 products

    Intel® Stratix® 10 FPGAs and SoC FPGAs