Article ID: 000087519 Content Type: Error Messages Last Reviewed: 02/23/2023

Why is the sys_error signal asserted high when using the Advanced SEU Detection Intel® FPGA IP in Intel® Stratix® 10 and Intel Agilex® 7 FPGA devices

Environment

  • Intel® Quartus® Prime Pro Edition
  • Advanced SEU Detection Intel® Stratix® 10 FPGA IP
  • Advanced SEU Detection Intel® FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT
    Description

    Due to a problem in Intel® Quartus® Prime Pro Edition Software version 20.4 and above, you will observe the sys_error signal asserted high in Signal Tap Logic Analyzer as shown below when using the Advanced SEU Detection Intel® FPGA IP in Intel® Stratix® 10 and Intel Agilex® 7 FPGA devices.

     

    The expected response of the sys_error signal should be low.    

     

     

    Resolution

    This problem is fixed starting with Intel® Quartus® Prime Pro Edition Software version 21.3.

     

     

    Related Products

    This article applies to 2 products

    Intel Agilex® 7 FPGAs and SoC FPGAs
    Intel® Stratix® 10 FPGAs and SoC FPGAs