Article ID: 000092848 Content Type: Error Messages Last Reviewed: 06/20/2023

Why does the simulation for Intel® Arria®10 EMIF IP in Mentor simulators hang when using the Intel® Quartus® Prime Standard Edition Software version 22.1?

Environment

  • Intel® Quartus® Prime Standard Edition
  • Intel® FPGA Simulation Tools
  • External Memory Interfaces Intel® Arria® 10 FPGA IP
  • BUILT IN - ARTICLE INTRO SECOND COMPONENT

    Critical Issue

    Description

    Intel® Arria® 10 EMIF IP Simulation hangs in the Mentor simulator when calibration mode in EMIF IP GUI is set to “Skip”. To work around the problem in the Intel Quartus® Prime Standard Edition Software version 22.1, set calibration mode in Intel® Arria 10 EMIF IP GUI to Abstract PHY calibration mode.

    Resolution

    This problem is scheduled to be fixed in a future release of the Intel® Quartus® Prime Standard Edition Software.

    Related Products

    This article applies to 1 products

    Intel® Arria®