Quartus® Prime Pro Edition User Guide: Partial Reconfiguration

Download PDF
ID 683834
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
Answers to Top FAQs 1. Creating a Partial Reconfiguration Design 2. Partial Reconfiguration Solutions IP User Guide A. Quartus® Prime Pro Edition User Guides
1. Creating a Partial Reconfiguration Design x
1.1. What's New In This Version 1.2. Partial Reconfiguration Terminology 1.3. Partial Reconfiguration Process Sequence 1.4. Internal Host Partial Reconfiguration 1.5. External Host Partial Reconfiguration 1.6. Partial Reconfiguration Design Flow 1.7. Partial Reconfiguration Design Considerations 1.8. Hierarchical Partial Reconfiguration 1.9. Partial Reconfiguration Design Timing Analysis 1.10. Partial Reconfiguration Design Simulation 1.11. Partial Reconfiguration Design Debugging 1.12. Partial Reconfiguration Security ( Stratix® 10 Designs) 1.13. PR Bitstream Compression and Encryption ( Arria® 10 and Cyclone® 10 GX Designs) 1.14. Avoiding PR Programming Errors 1.15. Exporting a Version-Compatible Compilation Database for PR Designs 1.16. Creating a Partial Reconfiguration Design Revision History
1.6. Partial Reconfiguration Design Flow x
1.6.1. Step 1: Identify Partial Reconfiguration Resources 1.6.2. Step 2: Create Design Partitions 1.6.3. Step 3: Floorplan the Design 1.6.4. Step 4: Add the Partial Reconfiguration Controller Intel® FPGA IP 1.6.5. Step 5: Define Personas 1.6.6. Step 6: Create Revisions for Personas 1.6.7. Step 7: Compile the Base Revision and Export the Static Region 1.6.8. Step 8: Setup PR Implementation Revisions 1.6.9. Step 9: Program the FPGA Device
1.6.3. Step 3: Floorplan the Design x
1.6.3.1. Applying Floorplan Constraints Incrementally
1.6.4. Step 4: Add the Partial Reconfiguration Controller Intel® FPGA IP x
1.6.4.1. Adding the Partial Reconfiguration Controller Intel FPGA IP 1.6.4.2. Adding the Partial Reconfiguration Controller Arria® 10/Cyclone 10 FPGA IP
1.6.7. Step 7: Compile the Base Revision and Export the Static Region x
1.6.7.1. Understanding PR Logic Utilization Reports
1.6.9. Step 9: Program the FPGA Device x
1.6.9.1. Generating PR Bitstream Files 1.6.9.2. Generating PR Bitstream Files 1.6.9.3. Partial Reconfiguration Bitstream Compatibility Checking 1.6.9.4. Raw Binary Programming File Byte Sequence Transmission Examples 1.6.9.5. Generating a Merged .pmsf File from Multiple .pmsf Files ( Arria® 10 and Cyclone® 10 GX Designs)
1.7. Partial Reconfiguration Design Considerations x
1.7.1. Partial Reconfiguration Design Guidelines 1.7.2. PR Design Timing Closure Best Practices 1.7.3. PR File Management 1.7.4. Evaluating PR Region Initial Conditions 1.7.5. Creating Wrapper Logic for PR Regions 1.7.6. Creating Freeze Logic for PR Regions 1.7.7. Resetting the PR Region Registers 1.7.8. Promoting Global Signals in a PR Region 1.7.9. Planning Clocks and other Global Routing 1.7.10. Implementing Clock Enable for On-Chip Memories
1.7.3. PR File Management x
1.7.3.1. Method 1 (Preferred): Specify Unique Entity and File Names for Each Persona 1.7.3.2. Method 2: Set QSF Assignment for a Parameterized PR Persona
1.7.8. Promoting Global Signals in a PR Region x
1.7.8.1. Viewing Row Clock Region Boundaries
1.7.10. Implementing Clock Enable for On-Chip Memories x
1.7.10.1. Clock Gating
1.8. Hierarchical Partial Reconfiguration x
1.8.1. Using Parent QDB Files from Different Compiles
1.9. Partial Reconfiguration Design Timing Analysis x
1.9.1. Running Timing Analysis on Aggregate Revisions
1.10. Partial Reconfiguration Design Simulation x
1.10.1. Partial Reconfiguration Simulation Flow 1.10.2. Simulating PR Persona Replacement
1.10.2. Simulating PR Persona Replacement x
1.10.2.1. altera_pr_persona_if Module 1.10.2.2. altera_pr_wrapper_mux_out Module 1.10.2.3. altera_pr_wrapper_mux_in Module
1.11. Partial Reconfiguration Design Debugging x
1.11.1. Debugging PR Designs with the Signal Tap Logic Analyzer 1.11.2. Instantiating the Intel Configuration Reset Release Endpoint to Debug Logic IP
1.12. Partial Reconfiguration Security ( Stratix® 10 Designs) x
1.12.1. PR Bitstream Security Validation ( Stratix® 10 Designs) 1.12.2. PR Bitstream Authentication ( Stratix® 10 Designs) 1.12.3. PR Bitstream Encryption ( Stratix® 10 Designs)
1.13. PR Bitstream Compression and Encryption ( Arria® 10 and Cyclone® 10 GX Designs) x
1.13.1. Generating an Encrypted PR Bitstream ( Arria® 10 or Cyclone® 10 GX Designs) 1.13.2. Clock-to-Data Ratio for Bitstream Encryption and Compression ( Arria® 10 or Cyclone® 10 GX Designs) 1.13.3. Data Compression Comparison
1.15. Exporting a Version-Compatible Compilation Database for PR Designs x
1.15.1. Version-Compatible Database Flow for PR Designs 1.15.2. Generating a Version-Compatible Compilation Database for PR Designs
2. Partial Reconfiguration Solutions IP User Guide x
2.1. Internal and External PR Host Configurations 2.2. Partial Reconfiguration Controller Intel FPGA IP 2.3. Partial Reconfiguration Controller Intel Arria® 10/Cyclone® 10 FPGA IP 2.4. Partial Reconfiguration External Configuration Controller Intel FPGA IP 2.5. Partial Reconfiguration Region Controller Intel® FPGA IP 2.6. Avalon® Memory-Mapped Partial Reconfiguration Freeze Bridge IP 2.7. Avalon® Streaming Partial Reconfiguration Freeze Bridge IP 2.8. Generating and Simulating Intel® FPGA IP 2.9. Quartus® Prime Pro Edition User Guide: Partial Reconfiguration Archive 2.10. Partial Reconfiguration Solutions IP User Guide Revision History
2.2. Partial Reconfiguration Controller Intel FPGA IP x
2.2.1. Memory Map 2.2.2. Parameters 2.2.3. Ports 2.2.4. Timing Specifications 2.2.5. PR Error Recovery 2.2.6. Secure Device Manager Firmware Error Reporting
2.2.5. PR Error Recovery x
2.2.5.1. PR Error Recovery Timing Specifications
2.2.6. Secure Device Manager Firmware Error Reporting x
2.2.6.1. SDM Firmware Error Reporting Timing Specification
2.3. Partial Reconfiguration Controller Intel Arria® 10/Cyclone® 10 FPGA IP x
2.3.1. Agent Interface 2.3.2. Reconfiguration Sequence 2.3.3. Interrupt Interface 2.3.4. Parameters 2.3.5. Ports 2.3.6. Timing Specifications 2.3.7. PR Control Block and CRC Block Verilog HDL Manual Instantiation 2.3.8. PR Control Block and CRC Block VHDL Manual Instantiation 2.3.9. PR Control Block Signals 2.3.10. Configuring an External Host for Arria® 10 or Cyclone® 10 GX Designs
2.3.4. Parameters x
2.3.4.1. Error Detection CRC Requirements
2.3.8. PR Control Block and CRC Block VHDL Manual Instantiation x
2.3.8.1. PR Control Block and CRC Block VHDL Component Declaration
2.3.9. PR Control Block Signals x
2.3.9.1. PR Control Block Signal Timing Diagrams
2.4. Partial Reconfiguration External Configuration Controller Intel FPGA IP x
2.4.1. Parameters 2.4.2. Ports 2.4.3. Partial Reconfiguration External Controller Intel FPGA IP Timing Specifications 2.4.4. Configuring an External Host for Agilex® 7, Agilex™ 5, and Stratix® 10 Designs
2.5. Partial Reconfiguration Region Controller Intel® FPGA IP x
2.5.1. Registers 2.5.2. Parameters 2.5.3. Ports
2.6. Avalon® Memory-Mapped Partial Reconfiguration Freeze Bridge IP x
2.6.1. Parameters 2.6.2. Interface Ports
2.7. Avalon® Streaming Partial Reconfiguration Freeze Bridge IP x
2.7.1. Parameters 2.7.2. Ports
2.8. Generating and Simulating Intel® FPGA IP x
2.8.1. Specifying the IP Core Parameters and Options ( Quartus® Prime Pro Edition) 2.8.2. Running the Freeze Bridge Update script 2.8.3. IP Core Generation Output ( Quartus® Prime Pro Edition) 2.8.4. Arria® 10 and Cyclone® 10 GX PR Control Block Simulation Model 2.8.5. Generating the PR Persona Simulation Model 2.8.6. Secure Device Manager Partial Reconfiguration Simulation Model
2.8.6. Secure Device Manager Partial Reconfiguration Simulation Model x
2.8.6.1. Monitoring the SDM 2.8.6.2. Simulating Unknown Outputs and Persona Activation 2.8.6.3. Simulation RBF Required Word Sequence
Answers to Top FAQs
1. Creating a Partial Reconfiguration Design
2. Partial Reconfiguration Solutions IP User Guide
A. Quartus® Prime Pro Edition User Guides

1.6.3. Step 3: Floorplan the Design

Use Logic Lock floorplan constraints in your PR design to physically partition the device. Each PR partition in your design must have a corresponding, exclusive physical partition.
You create Logic Lock regions to define the physical partition for your PR region. This partitioning ensures that the resources available to the PR region are the same for any persona that you implement.
PR Region Floorplan

Your PR region must include only core logic, such as LABs, RAMs, ROMs, and DSPs in a PR region. Agilex® 7, Agilex™ 5, and Stratix® 10 designs can also include Hyper-Registers in the PR partition. Instantiate all periphery design elements, such as transceivers, external memory interfaces, and clock networks in the static region of the design. The Logic Lock regions you create can cross periphery locations, such as the I/O columns and the HPS, because the constraint is core-only.

There are two region types:
  • Place regions—use these regions to constrain logic to a specific area of the device. The Fitter places the logic in the region you specify. The Fitter can also place other logic in the region unless you designate the region as Reserved.
  • Route regions—use these regions to constrain routing to a specific area. The routing region must fully enclose the placement region. Additionally, the routing regions for the PR regions cannot overlap.
Figure 8. Floorplanning your PR Design

Follow these guidelines when floorplanning your PR design:

  • Complete the periphery and clock floorplan before core floorplanning. You can use Interface Planner (Tools > Interface Planner) to create periphery floorplan assignments for your design.
  • Define a routing region that is at least 1 unit larger than the placement region in all directions. In defining this region, avoid any overlapping routing regions between the static and PR regions.
  • Do not overlap the routing regions of multiple PR regions.
  • Select the PR region row-wise for least bitstream overhead. In Arria® 10 and Cyclone® 10 GX devices, short, wider regions generate smaller bitstreams than tall, narrower regions. Configuration occurs on sectors for Agilex® 7, Agilex™ 5, and Stratix® 10 devices. For the least bitstream overhead, ensure that you align the PR region to sector boundaries. Refer to "Analyzing and Optimizing the Design Floorplan," in Quartus® Prime Pro Edition User Guide: Design Optimization.
  • For Arria® 10 and Cyclone® 10 GX devices, the height of your PR region affects the reconfiguration time. A PR region larger in the Y direction takes longer to reconfigure. This condition does not apply to Agilex® 7 or Stratix® 10 devices because they configure according to sectors. The reconfiguration time of Agilex® 7, Agilex™ 5, and Stratix® 10 devices depends on the number of sectors the PR region covers. This reconfiguration time can also be affected by other factors, such as interleaving or the presence of other Logic Lock regions.
  • To reduce programming files size for Agilex® 7, Agilex™ 5, and Stratix® 10 devices, target only the necessary number of sectors for PR. Also, ensure that the routing region of your PR region is 1 block (1 LAB row/column) inset from the edges of the clock sector boundaries.
  • Define sub Logic Lock regions within PR regions to improve timing closure.
  • If your design includes HPR parent and child partitions, the placement region of the parent region must fully enclose the routing and placement region of its child region. Also, the parent wire LUTs must be in an area outside the child PR region. This requirement is because the child PR region is exclusive to all other logic, which includes the parent and the static region.
  • The base revision .qdb provides the only effective pin assignments for the implementation revision. Even if you subsequently change the pin assignments to the implementation revisions, those changes do not take effect.

Section Content
Applying Floorplan Constraints Incrementally

Related Information
Level Two Title