JESD204C Intel® FPGA IP User Guide

ID 683108
Date 2/10/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

5.3. Link Reinitialization

The JESD204C IP implements a simple synchronous clear to all data and control logics during link reinitialization.

Link reinitialization occurs in two ways:

  • You manually trigger link reinitialization by setting the link_reinit bit. The hardware clears the link_reinit and reinit_in_prog bits when link reinitialization completes.
  • The hardware automatically triggers link reinitialization because of errors. You have full control, through the tx_err and rx_err registers, to set the specific type of errors to trigger link reinitialization automatically. The hardware clears the reinit_in_prog bit when link reinitialization completes.
Note: Link reinitialization does not initiate SYSREF re-detection. Use the sysref_singledet bit to re-detect SYSREF edge. Link reinitialization affects only the transport layer and link layer; the CSR, transceiver, and the PHY-related logics are not affected.