Low Latency 100G Ethernet Intel® Agilex™ FPGA IP Design Example User Guide

ID 683315
Date 12/14/2020
Public

2. Design Example Description

The design example demonstrates the functions of the Low Latency 100G Ethernet Intel® Agilex™ FPGA IP core with transceiver interface compliant with the IEEE 802.3ba standard CAUI-4 specification. You can generate the design from the Example Design tab in the Low Latency 100G Ethernet Intel® Agilex™ FPGA IP parameter editor.

To generate the design example, you must first set the parameter values for the IP core variation you intend to generate in your end product. Generating the design example creates a copy of the IP core; the testbench and hardware design example use this variation as the DUT. If you do not set the parameter values for the DUT to match the parameter values in your end product, the design example you generate does not exercise the IP core variation you intend.

Note: The testbench demonstrates a basic test of the IP core. It is not intended to be a substitute for a full verification environment. You must perform more extensive verification of your own Low Latency 100G Ethernet Intel® Agilex™ FPGA IP design in simulation and in hardware.