External Memory Interfaces Intel® Cyclone® 10 GX FPGA IP User Guide

ID 683663
Date 3/29/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.3.1. AFI Address and Command Timing Diagrams

Depending on the ratio between the memory clock and the PHY clock, different numbers of bits must be provided per PHY clock on the AFI interface. The following figures illustrate the AFI address/command waveforms in full, half and quarter rate respectively.

The waveforms show how the AFI command phase corresponds to the memory command output. AFI command 0 corresponds to the first memory command slot, AFI command 1 corresponds to the second memory command slot, and so on.

Figure 23. AFI Address and Command Full-Rate

Figure 24. AFI Address and Command Half-Rate

Figure 25. AFI Address and Command Quarter-Rate