Visible to Intel only — GUID: xrk1512645239019
Ixiasoft
Visible to Intel only — GUID: xrk1512645239019
Ixiasoft
6.1. Using Voltage Sensor in Intel® Arria® 10 and Intel® Cyclone® 10 GX Devices
You can use the voltage sensor feature to monitor critical on-chip power supplies and external analog voltages. The voltage sensor block for the Intel® Arria® 10 and Intel® Cyclone® 10 GX devices supports access from the FPGA core. The following sections describe the flow in using the voltage sensor for the Intel® Arria® 10 and Intel® Cyclone® 10 GX devices.
The conversion speed of the ADC is 500 ksps cumulative. When multiple channels are used, the speed per channel is reduced accordingly.
For better ADC performance, connect VREFP_ADC and VREFN_ADC pins to an external 1.25 V accurate reference source (±0.2%). An on-chip reference source (±10%) is activated by connecting the VREFP_ADC pin to GND. Treating VREFN_ADC as an analog signal together with the VREFP_ADC signal provides a differential 1.25 V voltage.
Connect both VREFP_ADC and VREFN_ADC pins to GND if no external reference is supplied.