Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

Download PDF
ID 721819
Date 12/11/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview 2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture 3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter 4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver 5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide 6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines 9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines 10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series 11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture x
2.1. F-Series and I-Series GPIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Differential I/O Bit Position 3.4. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations
3.4. Clocking the Differential Transmitters x
3.4.1. Transmitter Output Clock Parameters Settings
3.4.1. Transmitter Output Clock Parameters Settings x
3.4.1.1. Edge-Aligned tx_outclock to tx_out 3.4.1.2. Center-Aligned tx_outclock to tx_out
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings
4.2.1. Receiver Input Clock Parameters Settings x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Generating the LVDS SERDES Intel® FPGA IP 5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.6. LVDS SERDES Intel® FPGA IP Signals
5.1.4. Generating the LVDS SERDES Intel® FPGA IP x
5.1.4.1. Intel® FPGA IP Generation Output
5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.5.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.5.2. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.5.3. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.5.4. LVDS SERDES Intel® FPGA IP Transmitter Settings 5.1.5.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Intel® Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS Transmitters and Receivers in the Same GPIO Bank
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines
9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

Document Version Intel® Quartus® Prime Version Changes
2023.12.11 23.4
  • Changed the term "high-speed SERDES" to "LVDS SERDES".
  • Updated the figure showing the soft-CDR LVDS receiver interface with the IOPLL IP with LVDS transmitter in the same sub-bank.
2023.04.10 23.1
  • Removed the following sections:
    • Combined LVDS SERDES IP Transmitter and Receiver Design Example
    • LVDS SERDES IP Dynamic Phase Shift Design Example
  • Added a link to Placing LVDS Transmitters and Receivers in the Same GPIO Bank in the LVDS SERDES Intel FPGA IP Signals topic.
  • Updated product family name to " Intel Agilex® 7".
  • Retitled the document from Intel® Agilex™ F-Series and I-Series LVDS SERDES User Guide to Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series.
2022.11.30 22.1
  • Updated the VCO Frequency information in Table: Example: Generating Output Clocks Using an IOPLL IP (Receiver in DPA or Soft-CDR Mode)
2022.06.09 22.1

Updated the topic about placing LVDS transmitters and receivers in the same GPIO bank to add related information links to information about true differential signaling I/O standard specifications and termination.

2022.03.28 22.1
  • Initial release.
    • Moved the contents from the Intel® Agilex™ General-Purpose I/O and LVDS SERDES User Guide.
    • Restructured and rewritten the contents to improve ease of reference and modularity.
    • Updated the LVDS SERDES IP receiver settings to include the RCCS parameter.
    • Corrected the figure showing the basic LVDS SERDES IP system with internal PLL. The LVDS SERDES IP for Intel® Agilex™ F-Series and I-Series devices does not support the duplex feature.
    • Updated the guidelines for placing LVDS transmitters and receivers in the same GPIO bank to specify that you can only place 11 DPA or non-DPA receivers. You need one channel in the sub-bank for the I/O PLL reference clock input.
Note: For the history of previous revisions and to access previous versions of this user guide, refer to the Intel® Agilex™ F-Series and I-Series General-Purpose I/O User Guide.
Level Two Title