Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

Download PDF
ID 721819
Date 12/11/2023
Public
Document Table of Contents
Document Table of Contents x
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview 2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture 3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter 4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver 5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide 6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing 7. LVDS SERDES Intel® FPGA IP Design Examples 8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines 9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines 10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series 11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview x
1.1. LVDS SERDES Usage Modes
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture x
2.1. F-Series and I-Series GPIO Banks, SERDES, and DPA Locations 2.2. SERDES Blocks, Modes, and Clock Domains
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter x
3.1. LVDS SERDES Transmitter Blocks 3.2. Serializer 3.3. Differential I/O Bit Position 3.4. Clocking the Differential Transmitters
3.2. Serializer x
3.2.1. Serializer Bypass for DDR and SDR Operations
3.4. Clocking the Differential Transmitters x
3.4.1. Transmitter Output Clock Parameters Settings
3.4.1. Transmitter Output Clock Parameters Settings x
3.4.1.1. Edge-Aligned tx_outclock to tx_out 3.4.1.2. Center-Aligned tx_outclock to tx_out
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver x
4.1. LVDS SERDES Receiver Blocks 4.2. Clocking the LVDS SERDES Receivers 4.3. LVDS SERDES Receiver Modes
4.1. LVDS SERDES Receiver Blocks x
4.1.1. Dynamic Phase Alignment Block 4.1.2. Synchronizer (DPA FIFO) 4.1.3. Data Realignment Block (Bit Slip) 4.1.4. Deserializer
4.2. Clocking the LVDS SERDES Receivers x
4.2.1. Receiver Input Clock Parameters Settings
4.2.1. Receiver Input Clock Parameters Settings x
4.2.1.1. Edge-Aligned inclock to rx_in 4.2.1.2. Center-Aligned inclock to rx_in
4.3. LVDS SERDES Receiver Modes x
4.3.1. Non-DPA Mode 4.3.2. DPA Mode 4.3.3. Soft-CDR Mode
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide x
5.1. LVDS SERDES Intel® FPGA IP 5.2. LVDS Interface with External PLL Mode 5.3. LVDS SERDES IP Initialization and Reset
5.1. LVDS SERDES Intel® FPGA IP x
5.1.1. Release Information 5.1.2. LVDS SERDES Intel® FPGA IP Features 5.1.3. LVDS SERDES IP Usage Modes 5.1.4. Generating the LVDS SERDES Intel® FPGA IP 5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings 5.1.6. LVDS SERDES Intel® FPGA IP Signals
5.1.4. Generating the LVDS SERDES Intel® FPGA IP x
5.1.4.1. Intel® FPGA IP Generation Output
5.1.5. LVDS SERDES Intel® FPGA IP Parameter Settings x
5.1.5.1. LVDS SERDES Intel® FPGA IP General Settings 5.1.5.2. LVDS SERDES Intel® FPGA IP PLL Settings 5.1.5.3. LVDS SERDES Intel® FPGA IP Receiver Settings 5.1.5.4. LVDS SERDES Intel® FPGA IP Transmitter Settings 5.1.5.5. LVDS SERDES Intel® FPGA IP Clock Resource Summary
5.2. LVDS Interface with External PLL Mode x
5.2.1. IOPLL IP Signal Interface with LVDS SERDES IP 5.2.2. IOPLL Parameter Values for External PLL Mode 5.2.3. Connection between IOPLL IP and LVDS SERDES IP in External PLL Mode
5.3. LVDS SERDES IP Initialization and Reset x
5.3.1. Initializing the LVDS SERDES IP in Non-DPA Mode 5.3.2. Initializing the LVDS SERDES IP in DPA Mode 5.3.3. Resetting the DPA 5.3.4. Word Boundaries Alignment
5.3.4. Word Boundaries Alignment x
5.3.4.1. Aligning Word Boundaries
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing x
6.1. LVDS SERDES Intel® FPGA IP Timing 6.2. LVDS SERDES Source-Synchronous Timing Budget
6.1. LVDS SERDES Intel® FPGA IP Timing x
6.1.1. I/O Timing Analysis 6.1.2. FPGA Timing Analysis 6.1.3. Timing Analysis for the External PLL Mode
6.1.1. I/O Timing Analysis x
6.1.1.1. Obtaining RSKM Report 6.1.1.2. Obtaining TCCS Report
6.2. LVDS SERDES Source-Synchronous Timing Budget x
6.2.1. Transmitter Channel-to-Channel Skew 6.2.2. Receiver Skew Margin
7. LVDS SERDES Intel® FPGA IP Design Examples x
7.1. LVDS SERDES IP Synthesizable Intel® Quartus® Prime Design Examples 7.2. LVDS SERDES IP Simulation Design Example
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines x
8.1. Use PLLs in Integer PLL Mode for LVDS 8.2. Use High-Speed Clock from PLL to Clock SERDES Only 8.3. Pin Placement for Differential Channels 8.4. SERDES Pin Pairs for Soft-CDR Mode 8.5. Placing LVDS Transmitters and Receivers in the Same GPIO Bank
1. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Overview
2. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Architecture
3. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Transmitter
4. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Receiver
5. Intel Agilex® 7 F-Series and I-Series High-Speed LVDS I/O Implementation Guide
6. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Timing
7. LVDS SERDES Intel® FPGA IP Design Examples
8. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Design Guidelines
9. Intel Agilex® 7 F-Series and I-Series LVDS SERDES Troubleshooting Guidelines
10. Documentation Related to the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series
11. Document Revision History for the Intel Agilex® 7 LVDS SERDES User Guide: F-Series and I-Series

1.1. LVDS SERDES Usage Modes

You can use the F-Series and I-Series LVDS SERDES through the LVDS SERDES Intel® FPGA IP. The LVDS SERDES IP supports four SERDES functional modes.
Table 1.  Summary of the F-Series and I-Series LVDS SERDES Usage ModesAll usage modes in this table support SERDES factors of 3 to 10 .
Functional Mode Description

Transmitter

(TX)

  • The SERDES block acts as a serializer.
  • A PLL generates these signals:
    • fast_clock
    • load_enable

Non-DPA receiver

(RX Non-DPA)

  • The SERDES block acts as a deserializer that bypasses the DPA and DPA-FIFO.
  • A PLL generates the fast_clock signal.
  • The SERDES captures the incoming data at the bit slip with the fast_clock signal. Therefore, you must ensure the correct clock–data alignment.

DPA-FIFO receiver

(RX DPA-FIFO)

  • The SERDES block acts as a deserializer that uses the DPA block.
  • The DPA block uses a set of eight DPA clocks to select the optimal phase for sampling data.
    • The DPA clocks run at the fast_clock frequency with each clock phase-shifted 45° apart.
    • The DPA-FIFO, a circular buffer, samples the incoming data with the selected DPA clock and forwards the data to LVDS clock domain.
    • The bit slip circuitry then samples the data and inserts latencies to realign the data to match the desired word boundary of the deserialized data.

Soft-CDR receiver

(RX Soft-CDR)

  • The LVDS SERDES IP forwards these clocks:
    • The optimal DPA clock (DPACLK) into the LVDS clock domain as the fast_clock signal.
    • The rx_divfwdclk, produced by the local clock generator, to the device core.
  • Each bank has only 12 soft-CDR channels available. Refer to the device pin-out files to determine which pin pairs can support soft-CDR channels in each bank.
    • The device pin-out files list the available LVDS pin pairs under the Dedicated Tx/Rx Channel column in the following format: 
      LVDS<bank number>_<pin pair><p or n>
    • The <pin pair> with an even number value supports soft-CDR mode.
Related Information
Level Two Title