Nios® V Embedded Processor Design Handbook

ID 726952
Date 12/04/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

2.1.1.2.1. Debug Tab

Table 7.  Debug Tab Parameters
Debug Tab Description
Enable Debug
  • Enable this option to add the JTAG target connection module to the Nios® V processor.
  • The JTAG target connection module allows connecting to the Nios® V processor through the JTAG interface pins of the FPGA.
  • The connection provides the following basic capabilities:
    • Start and stop the Nios® V processor
    • Examine and edit registers and memory.
    • Download the Nios® V application .elf file to the processor memory at runtime via niosv-download.
    • Debug the application running on the Nios® V processor
  • Connect dm_agent port to the processor instruction and data bus. Ensure the base address between both buses are the same.
Enable Reset from Debug Module
  • Enable this option to expose dbg_reset_out and ndm_reset_in ports.
  • JTAG debugger or niosv-download -r command trigger the dbg_reset_out, which allows the Nios® V processor to reset system peripherals connecting to this port.
  • You must connect the dbg_reset_out interface to ndm_reset_in instead of reset interface to trigger reset to processor core and timer module.