Low Latency 100G Ethernet Intel® FPGA IP Core User Guide: For Intel® Stratix® 10 Devices

Download PDF
ID 683100
Date 2/16/2022
Public
Document Table of Contents
Document Table of Contents x
1. Low Latency 100G Ethernet Intel FPGA IP Overview 2. Getting Started 3. IP Core Parameters 4. Functional Description 5. Reset 6. Interfaces and Signal Descriptions 7. Registers 8. Debugging the Link 9. Ethernet Toolkit Overview 10. Low Latency 100G Ethernet Intel FPGA IP Core User Guide Archives 11. Document Revision History for the Low Latency 100G Ethernet Intel FPGA IP Core User Guide
1. Low Latency 100G Ethernet Intel FPGA IP Overview x
1.1. Low Latency 100G Ethernet Intel FPGA IP Core Supported Features 1.2. IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. IP Core Device Family and Speed Grade Support x
1.2.1. Low Latency 100G Ethernet Intel FPGA IP Core Device Family Support 1.2.2. Low Latency 100G Ethernet Intel FPGA IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Compilation Checking 1.3.3. Hardware Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the IP Core Parameters and Options 2.3. Simulating the IP Core 2.4. Generated File Structure 2.5. Integrating Your IP Core in Your Design 2.6. IP Core Testbenches 2.7. Compiling the Full Design and Programming the FPGA
2.5. Integrating Your IP Core in Your Design x
2.5.1. Pin Assignments 2.5.2. Adding the Transceiver PLLs 2.5.3. Placement Settings for the Low Latency 100G Ethernet Intel FPGA IP Core
4. Functional Description x
4.1. High Level System Overview 4.2. Low Latency 100G Ethernet Intel FPGA IP Core TX Datapath 4.3. Low Latency 100G Ethernet Intel FPGA IP Core RX Datapath 4.4. Flow Control 4.5. User Interface to Ethernet Transmission 4.6. Auto Negotiation and Link Training 4.7. Auto Adaptation
4.2. Low Latency 100G Ethernet Intel FPGA IP Core TX Datapath x
4.2.1. Preamble, Start, and SFD Insertion 4.2.2. Length/Type Field Processing 4.2.3. Frame Padding 4.2.4. Frame Check Sequence (CRC-32) Insertion 4.2.5. Inter-Packet Gap Adjustment 4.2.6. Error Insertion Test and Debug Feature 4.2.7. TX PCS 4.2.8. TX RSFEC
4.3. Low Latency 100G Ethernet Intel FPGA IP Core RX Datapath x
4.3.1. Low Latency 100G Ethernet Intel FPGA IP Core Preamble Processing 4.3.2. IP Core Strict SFD Checking 4.3.3. Low Latency 100G Ethernet Intel FPGA IP Core FCS (CRC-32) Removal 4.3.4. Low Latency 100G Ethernet Intel FPGA IP Core CRC Checking 4.3.5. Low Latency 100G Ethernet Intel FPGA IP Core Malformed Packet Handling 4.3.6. RX CRC Forwarding 4.3.7. Inter-Packet Gap 4.3.8. RX PCS 4.3.9. RX RSFEC
4.4. Flow Control x
4.4.1. TX Pause/PFC Flow Control Transmission 4.4.2. XON/XOFF Pause Frames
4.5. User Interface to Ethernet Transmission x
4.5.1. Order of Transmission 4.5.2. Bit Order For TX and RX Datapaths
6. Interfaces and Signal Descriptions x
6.1. TX MAC Interface to User Logic 6.2. RX MAC Interface to User Logic 6.3. Transceivers 6.4. Transceiver Reconfiguration Signals 6.5. Avalon-MM Management Interface 6.6. Miscellaneous Status and Debug Signals 6.7. Reset Signals 6.8. Clocks 6.9. Flow Control Interface
6.4. Transceiver Reconfiguration Signals x
6.4.1. Disabling Background Calibration
7. Registers x
7.1. PHY Registers 7.2. TX MAC Registers 7.3. RX MAC Registers 7.4. Pause/PFC Flow Control Registers 7.5. Statistics Registers 7.6. TX Reed-Solomon FEC Registers 7.7. RX Reed-Solomon FEC Registers 7.8. Auto-Negotiation and Link Training Registers
7.5. Statistics Registers x
7.5.1. TX Statistics Registers 7.5.2. RX Statistics Registers
7.8. Auto-Negotiation and Link Training Registers x
7.8.1. AN/LT Sequencer Config 7.8.2. AN/LT Sequencer Status 7.8.3. Auto Negotiation Config Register 1 7.8.4. Auto Negotiation Config Register 2 7.8.5. Auto Negotiation Status Register 7.8.6. Auto Negotiation Config Register 3 7.8.7. Auto Negotiation Config Register 4 7.8.8. Auto Negotiation Config Register 5 7.8.9. Auto Negotiation Config Register 6 7.8.10. Auto Negotiation Status Register 1 7.8.11. Auto Negotiation Status Register 2 7.8.12. Auto Negotiation Status Register 3 7.8.13. Auto Negotiation Status Register 4 7.8.14. Auto Negotiation Status Register 5 7.8.15. Link Training Config Register 1 7.8.16. Link Training Config Register 2 7.8.17. Link Training Status Register 1 7.8.18. Link Training Config Register for Lane 0 7.8.19. Link Training Frame Contents for Lane 0 7.8.20. Local Transceiver TX EQ 1 Settings for Lane 0 7.8.21. Local Transceiver TX EQ 2 Settings for Lane 0 7.8.22. Local Link Training Parameters 7.8.23. Link Training Config Register for Lane 1 7.8.24. Link Training Frame Contents for Lane 1 7.8.25. Local Transceiver TX EQ 1 Settings for Lane 1 7.8.26. Local Transceiver TX EQ 2 Settings for Lane 1 7.8.27. Link Training Config Register for Lane 2 7.8.28. Link Training Frame Contents for Lane 2 7.8.29. Local Transceiver TX EQ 1 Settings for Lane 2 7.8.30. Local Transceiver TX EQ 2 Settings for Lane 2 7.8.31. Link Training Config Register for Lane 3 7.8.32. Link Training Frame Contents for Lane 3 7.8.33. Local Transceiver TX EQ 1 Settings for Lane 3 7.8.34. Local Transceiver TX EQ 2 Settings for Lane 3
9. Ethernet Toolkit Overview x
9.1. Features
1. Low Latency 100G Ethernet Intel FPGA IP Overview
2. Getting Started
3. IP Core Parameters
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Registers
8. Debugging the Link
9. Ethernet Toolkit Overview
10. Low Latency 100G Ethernet Intel FPGA IP Core User Guide Archives
11. Document Revision History for the Low Latency 100G Ethernet Intel FPGA IP Core User Guide

6.8. Clocks

You must set the transceiver reference clock (clk_ref) frequency to a value that the IP core supports. The Low Latency 100G Ethernet Intel FPGA IP core supports a clk_ref frequency of 644.53125 MHz or 322.265625 MHz ±100 ppm. The ±100ppm value is required for any clock source providing the transceiver reference clock.

Table 19.  Clock InputsDescribes the input clocks that you must provide.

Signal Name

Description

clk_ref

The input clock clk_ref is the reference clock for the transceiver RX CDR PLL and the RS-FEC PLLs.

This clock must have a frequency of 644.53125 MHz with a ±100 ppm accuracy per the IEEE 802.3ba-2010 Ethernet Standard.

In addition, clk_ref must meet the jitter specification of the IEEE 802.3ba-2010 Ethernet Standard.

The PLL and clock generation logic use this reference clock to derive the transceiver and PCS clocks. The input clock should be a high quality signal on the appropriate dedicated clock pin. Refer to the relevant device datasheet for transceiver reference clock phase noise specifications.

tx_serial_clk[1:0]

These two input clocks are part of the external PLL interface. The IP core fans out each clock to target two of the four transceiver PHY links. You must drive these clocks from two ATX PLLs that you configure separately from the Low Latency 100G Ethernet Intel FPGA IP core. The required frequency is 12.890625 GHz.

clk_status

Clocks the control and status interface. clk_status is expected to be a 100–162 MHz clock. If AN/LT option is enabled, the clk_status and reconfig_clk must be connected to the same clock.

reconfig_clk

Clocks the transceiver reconfiguration interface. reconfig_clk is expected to be a 100–162 MHz clock. If AN/LT option is enabled, the clk_status and reconfig_clk must be connected to the same clock.

Table 20.  Clock OutputsDescribes the output clocks that the IP core provides. In most cases these clocks participate in internal clocking of the IP core as well.

Signal Name

Description

clk_txmac

The TX clock for the IP core is clk_txmac. The TX MAC clock frequency is 390.625  MHz.

This clock is guaranteed stable when tx_lanes_stable is high.

clk_rxmac

The RX clock for the IP core is clk_rxmac. The RX MAC clock frequency is 390.625  MHz.

This clock is only reliable when rx_pcs_ready has the value of 1. The IP core generates clk_rxmac from a recovered clock that relies on the presence of incoming RX data.

Related Information
Level Two Title