Low Latency 100G Ethernet Intel® FPGA IP Core User Guide: For Intel® Stratix® 10 Devices

Download PDF
ID 683100
Date 2/16/2022
Public
Document Table of Contents
Document Table of Contents x
1. Low Latency 100G Ethernet Intel FPGA IP Overview 2. Getting Started 3. IP Core Parameters 4. Functional Description 5. Reset 6. Interfaces and Signal Descriptions 7. Registers 8. Debugging the Link 9. Ethernet Toolkit Overview 10. Low Latency 100G Ethernet Intel FPGA IP Core User Guide Archives 11. Document Revision History for the Low Latency 100G Ethernet Intel FPGA IP Core User Guide
1. Low Latency 100G Ethernet Intel FPGA IP Overview x
1.1. Low Latency 100G Ethernet Intel FPGA IP Core Supported Features 1.2. IP Core Device Family and Speed Grade Support 1.3. IP Core Verification 1.4. Performance and Resource Utilization 1.5. Release Information
1.2. IP Core Device Family and Speed Grade Support x
1.2.1. Low Latency 100G Ethernet Intel FPGA IP Core Device Family Support 1.2.2. Low Latency 100G Ethernet Intel FPGA IP Core Device Speed Grade Support
1.3. IP Core Verification x
1.3.1. Simulation Environment 1.3.2. Compilation Checking 1.3.3. Hardware Testing
2. Getting Started x
2.1. Installing and Licensing Intel® FPGA IP Cores 2.2. Specifying the IP Core Parameters and Options 2.3. Simulating the IP Core 2.4. Generated File Structure 2.5. Integrating Your IP Core in Your Design 2.6. IP Core Testbenches 2.7. Compiling the Full Design and Programming the FPGA
2.5. Integrating Your IP Core in Your Design x
2.5.1. Pin Assignments 2.5.2. Adding the Transceiver PLLs 2.5.3. Placement Settings for the Low Latency 100G Ethernet Intel FPGA IP Core
4. Functional Description x
4.1. High Level System Overview 4.2. Low Latency 100G Ethernet Intel FPGA IP Core TX Datapath 4.3. Low Latency 100G Ethernet Intel FPGA IP Core RX Datapath 4.4. Flow Control 4.5. User Interface to Ethernet Transmission 4.6. Auto Negotiation and Link Training 4.7. Auto Adaptation
4.2. Low Latency 100G Ethernet Intel FPGA IP Core TX Datapath x
4.2.1. Preamble, Start, and SFD Insertion 4.2.2. Length/Type Field Processing 4.2.3. Frame Padding 4.2.4. Frame Check Sequence (CRC-32) Insertion 4.2.5. Inter-Packet Gap Adjustment 4.2.6. Error Insertion Test and Debug Feature 4.2.7. TX PCS 4.2.8. TX RSFEC
4.3. Low Latency 100G Ethernet Intel FPGA IP Core RX Datapath x
4.3.1. Low Latency 100G Ethernet Intel FPGA IP Core Preamble Processing 4.3.2. IP Core Strict SFD Checking 4.3.3. Low Latency 100G Ethernet Intel FPGA IP Core FCS (CRC-32) Removal 4.3.4. Low Latency 100G Ethernet Intel FPGA IP Core CRC Checking 4.3.5. Low Latency 100G Ethernet Intel FPGA IP Core Malformed Packet Handling 4.3.6. RX CRC Forwarding 4.3.7. Inter-Packet Gap 4.3.8. RX PCS 4.3.9. RX RSFEC
4.4. Flow Control x
4.4.1. TX Pause/PFC Flow Control Transmission 4.4.2. XON/XOFF Pause Frames
4.5. User Interface to Ethernet Transmission x
4.5.1. Order of Transmission 4.5.2. Bit Order For TX and RX Datapaths
6. Interfaces and Signal Descriptions x
6.1. TX MAC Interface to User Logic 6.2. RX MAC Interface to User Logic 6.3. Transceivers 6.4. Transceiver Reconfiguration Signals 6.5. Avalon-MM Management Interface 6.6. Miscellaneous Status and Debug Signals 6.7. Reset Signals 6.8. Clocks 6.9. Flow Control Interface
6.4. Transceiver Reconfiguration Signals x
6.4.1. Disabling Background Calibration
7. Registers x
7.1. PHY Registers 7.2. TX MAC Registers 7.3. RX MAC Registers 7.4. Pause/PFC Flow Control Registers 7.5. Statistics Registers 7.6. TX Reed-Solomon FEC Registers 7.7. RX Reed-Solomon FEC Registers 7.8. Auto-Negotiation and Link Training Registers
7.5. Statistics Registers x
7.5.1. TX Statistics Registers 7.5.2. RX Statistics Registers
7.8. Auto-Negotiation and Link Training Registers x
7.8.1. AN/LT Sequencer Config 7.8.2. AN/LT Sequencer Status 7.8.3. Auto Negotiation Config Register 1 7.8.4. Auto Negotiation Config Register 2 7.8.5. Auto Negotiation Status Register 7.8.6. Auto Negotiation Config Register 3 7.8.7. Auto Negotiation Config Register 4 7.8.8. Auto Negotiation Config Register 5 7.8.9. Auto Negotiation Config Register 6 7.8.10. Auto Negotiation Status Register 1 7.8.11. Auto Negotiation Status Register 2 7.8.12. Auto Negotiation Status Register 3 7.8.13. Auto Negotiation Status Register 4 7.8.14. Auto Negotiation Status Register 5 7.8.15. Link Training Config Register 1 7.8.16. Link Training Config Register 2 7.8.17. Link Training Status Register 1 7.8.18. Link Training Config Register for Lane 0 7.8.19. Link Training Frame Contents for Lane 0 7.8.20. Local Transceiver TX EQ 1 Settings for Lane 0 7.8.21. Local Transceiver TX EQ 2 Settings for Lane 0 7.8.22. Local Link Training Parameters 7.8.23. Link Training Config Register for Lane 1 7.8.24. Link Training Frame Contents for Lane 1 7.8.25. Local Transceiver TX EQ 1 Settings for Lane 1 7.8.26. Local Transceiver TX EQ 2 Settings for Lane 1 7.8.27. Link Training Config Register for Lane 2 7.8.28. Link Training Frame Contents for Lane 2 7.8.29. Local Transceiver TX EQ 1 Settings for Lane 2 7.8.30. Local Transceiver TX EQ 2 Settings for Lane 2 7.8.31. Link Training Config Register for Lane 3 7.8.32. Link Training Frame Contents for Lane 3 7.8.33. Local Transceiver TX EQ 1 Settings for Lane 3 7.8.34. Local Transceiver TX EQ 2 Settings for Lane 3
9. Ethernet Toolkit Overview x
9.1. Features
1. Low Latency 100G Ethernet Intel FPGA IP Overview
2. Getting Started
3. IP Core Parameters
4. Functional Description
5. Reset
6. Interfaces and Signal Descriptions
7. Registers
8. Debugging the Link
9. Ethernet Toolkit Overview
10. Low Latency 100G Ethernet Intel FPGA IP Core User Guide Archives
11. Document Revision History for the Low Latency 100G Ethernet Intel FPGA IP Core User Guide

5. Reset

Control and Status registers control three parallel soft resets. These soft resets are not self-clearing. Software clears them by writing to the appropriate register. In addition, the IP core has three hard reset signals.

Asserting the external hard reset csr_rst_n returns all Control and Status registers to their original values, including the statistics counters. An additional dedicated reset signal resets the transceiver reconfiguration interface.

Figure 16. Conceptual Overview of General IP Core Reset LogicThe three hard resets are top-level ports. The three soft resets are internal signals which are outputs of the PHY_CONFIG register. Software writes the appropriate bit of the PHY_CONFIG to assert a soft reset.

The general reset signals reset the following functions:

  • soft_tx_rst, tx_rst_n: Resets the IP core in the TX direction. Resets the TX PCS, TX MAC, and digital portion of the transceiver. This reset leads to deassertion of the tx_lanes_stable output signal.
  • soft_rx_rst, rx_rst_n: Resets the IP core in the RX direction. Resets the RX PCS and RX MAC. This reset leads to deassertion of the rx_pcs_ready output signal.
  • sys_rst, csr_rst_n: Resets the IP core. Resets the TX and RX MACs, PCS, and transceivers.
    Note: csr_rst_n resets the Control and Status registers, including the statistics counters. sys_rst does not reset any Control and Status registers.
    This reset leads to deassertion of the tx_lanes_stable and rx_pcs_ready output signals.

In addition, the synchronous reconfig_reset signal resets the IP core transceiver reconfiguration interface, an Avalon-MM interface. Associated clock is the reconfig_clk, which clocks the transceiver reconfiguration interface.

System Considerations

You should perform a system reset before beginning IP core operation, preferably by asserting the csr_rst_n signal.

If you assert the transmit reset when the downstream receiver is already aligned, the receiver loses alignment. Before the downstream receiver loses lock, it might receive some malformed frames.

If you assert the receive reset while the upstream transmitter is sending packets, the packets in transit are corrupted.

If the ATX PLL loses lock, the IP core forces a transmit side reset. After the ATX PLL acquires lock, the IP core deasserts the transmit reset.

If the IP core suffers loss of signal on the serial links, it asserts the receive reset.

Related Information
Level Two Title