AN 766: Intel® Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline

Download PDF
ID 683132
Date 3/12/2019
Public
Document Table of Contents
Document Table of Contents x
Intel® Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline
Intel® Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline x
Intel® Stratix® 10 Devices and Transceiver Channels PCB Stackup Selection Guideline Recommendations for High Speed Signal PCB Routing FPGA Fan-out Region Design CFP2/CFP4 Connector Board Layout Design Guideline QSFP+/zSFP/QSFP28 Connector Board Layout Design Guideline SMA 2.4-mm Layout Design Guideline Tyco/Amphenol Interlaken Connector Design Guideline Electrical Specifications Document Revision History for AN 766: Intel® Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline
FPGA Fan-out Region Design x
Signal Break-out Recommendations FPGA Fan-out Region Routing Recommendations AC Coupling Capacitor Layout and Optimization Guidelines
Signal Break-out Recommendations x
Option 1: Via-In-Pad Topology Option 2: Dog-bone with GND Cutout at BGA Pad Topology Option 3: Micro-via Topology GND Cutout Under BGA Pads in Fan-out Configuration Comparison of Dog-bone with GND Cutout Under the BGA and Via-in-Pad Configurations Trace Shape Routing at the BGA Void Area (Tear Drop Configuration)
FPGA Fan-out Region Routing Recommendations x
Comparison of Conventional and Recommended Break-out Routing Topologies
Comparison of Conventional and Recommended Break-out Routing Topologies x
Conventional Jog-out Routings with Skew-matching Right After Break-out The Impact of Via Height and Via Anti-pad Over Insertion Loss
AC Coupling Capacitor Layout and Optimization Guidelines x
0201 AC Capacitor 0402 AC Capacitor PCB AC Capacitor Placement Layout Recommendation
0201 AC Capacitor x
Sweeping Anti-pad Radius Sweeping Void Width only on the First GND Plane Under the Capacitor
0402 AC Capacitor x
Sweeping Anti-pad Radius Sweeping Void Width Only on the First GND Plane under the Capacitor Adding a Trace Reference to the 0201 AC Capacitor Adding a Trace Reference to the 0402 AC Capacitor
PCB AC Capacitor Placement Layout Recommendation x
What to Avoid for AC Capacitor Configuration
CFP2/CFP4 Connector Board Layout Design Guideline x
CFP2 Host Connector, Module Assembly, and Pinout CFP4 Host Connector, Module Assembly, and Pinout Recommended PCB Design Guideline at the CFP2/CFP4 Connector CFP4 Design Example and Optimization Performance
CFP4 Design Example and Optimization Performance x
CFP4 Connector Layout: Signal Via, Trace Routing Impact, and Optimization Two Different Break-out Routings at the CFP4 Connector Area CFP4 Connector Routing Topologies Design Example Full CFP4 Channel Analysis Design Example (Excluding the Connector) CFP2 Connector Area Layout
QSFP+/zSFP/QSFP28 Connector Board Layout Design Guideline x
QSFP+ Module Assembly and Pinout Recommended PCB Design Guideline for QSFP+/zQSFP/QSFP28 Channels Recommended QSFP+ Signal Routing QSFP28 Example Design and Performance Optimization
SMA 2.4-mm Layout Design Guideline x
SMA 2.4 mm Molex® Connector Assembly PCB Design Guidelines for Channels Using the 2.4 mm Connector 2.4 mm Example Design Performance
PCB Design Guidelines for Channels Using the 2.4 mm Connector x
Recommended PCB layout Design for Version-A SMA 2.4 mm Connector Recommended PCB layout Design for Version-B SMA 2.4 mm Connector Performance Comparison between Option1 and Option2 layout Other 2.4 mm Connectors 2.4 mm Channel Specifications
Tyco/Amphenol Interlaken Connector Design Guideline x
Connector Signal and Pin Assignment
Connector Signal and Pin Assignment x
PCB Design Guidelines for Channels with 25 Gbps + Interlaken Interface Connector Recommendations Interlaken Channel Interface Performance Example
Electrical Specifications x
CEI 28 Very Short Reach (VSR) Specifications for CFP2/CFP4/QSFP+/QSFP28/zQSFP/SMA 2.4 mm Interlaken Interface Specification
Intel® Stratix® 10 Devices, High Speed Signal Interface Layout Design Guideline

CFP2 Connector Area Layout

These are the differential TDR results from simulation including the PCB portion connected to the CFP2 connector and host compliance board. The TDR result is based on the following configuration:

  • No GND cutout
  • One single GND layer cutout
  • Two GND layer cutouts below the CFP2 high speed signal pads

The host PCB routing has a 100 Ω impedance.

Figure 71. Simulation Structure of Partial HCB, CFP2 Connector, and Host PCB with TDR Differential Impedance ResultsThe TDR differential impedance results are from the host PCB while the HCB port is terminated.

The following figure shows the actual measured differential TDR on an Intel® Arria® 10 device populated SI board for CFP2 full channel. Two GND layers are cut out below the high speed connector pads. The reduced differential impedance is approximately 8.5 Ω at the CFP2 connector transition to the PCB.

Figure 72.  Intel® Arria® 10 device PCB Layout at the CFP2 Connector
Figure 73. TDR Differential Impedance for Intel® Arria® 10 device CFP2 Full Channel Including CFP2 Connector and HCB
Figure 74. Insertion and Return Loss Performances of the Intel® Arria® 10 device CFP2 ChannelThis figure uses the example in Figure 72 with bare host board only.

Measured SP performances for one single TX pair and one single RX pair which both meet the CFP2 specification.

Level Two Title