Intel® High Level Synthesis Compiler Pro Edition: Best Practices Guide

ID 683152
Date 10/04/2021
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.1.1.2. Register

A register is the most basic storage element in an FPGA. It has an input (in), an output (out), and a clock signal (clk). It is synchronous, that is, it synchronizes output changes to a clock. In an ALM, a register may store the output of the LUT.

The following figure illustrates a register:



Note: The clock signal is implied and not shown in some figures.

The following figure illustrates the waveform of register signals:



The input data propagates to the output on every clock cycle. The output remains unchanged between clock cycles.