Intel® Stratix® 10 Configuration User Guide

ID 683762
Date 10/21/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

3.2.7. Serial Flash Memory Layout

Serial flash devices store the configuration data in sections. The first stage boot loader location depends on the selected serial flash memory layout.

Non-HPS Case:

The following diagram illustrates sections of a non-HPS Intel® Stratix® 10 configuration data mapping in a serial flash device. The non-HPS bitstreams do not include first stage boot loader (FSBL). Refer to Intel® Stratix® 10 SoC FPGA Bitstream Sections of the HPS Technical Reference Manual for more information about flash memory layout for HPS devices.

Figure 45. Serial Flash Memory Layout Diagram: Non-HPS Case

HPS Case with FPGA First Option:

The following diagram illustrates sections of an HPS Intel® Stratix® 10 configuration data mapping in a serial flash device and the HPS first stage boot loader (FSBL) location when you select the FPGA First option.
Figure 46. Serial Flash Memory Layout Diagram: HPS Case with FPGA First Option

HPS Case with HPS First Option and Dual Flash:

The following diagram illustrates sections of an HPS Intel® Stratix® 10 configuration data mapping in a serial flash device when you select the HPS First option.
Figure 47. Serial Flash Memory Layout Diagram: HPS Case with HPS First Option

If you use a third-party programmer to program an .rpd, ensure that the configuration data is stored starting from address 0 of the serial flash device. If you use .jic or .pof files, the Intel® Stratix® 10 Programmer automatically programs the configuration data starting from address 0 of the serial flash device.

Intel currently support the following listed Supported Flash Devices for Intel® Stratix® 10