Agilex™ 7 Clocking and PLL User Guide: M-Series

Download PDF
ID 769001
Date 4/01/2024
Public
Document Table of Contents
Document Table of Contents x
1. Agilex™ 7 FPGA M-Series Clocking and PLL Overview 2. M-Series Clocking and PLL Architecture and Features 3. M-Series Clocking and PLL Design Considerations 4. Clock Control Intel® FPGA IP Core 5. IOPLL Intel® FPGA IP Core 6. Agilex™ 7 Clocking and PLL User Guide: M-Series Archives 7. Document Revision History for the Agilex™ 7 Clocking and PLL User Guide: M-Series
1. Agilex™ 7 FPGA M-Series Clocking and PLL Overview x
1.1. Clock Networks Overview 1.2. PLLs Overview
2. M-Series Clocking and PLL Architecture and Features x
2.1. Clock Networks Architecture and Features 2.2. PLLs Architecture and Features
2.1. Clock Networks Architecture and Features x
2.1.1. Clock Network Architecture 2.1.2. Clock Resources 2.1.3. Clock Control Features
2.1.1. Clock Network Architecture x
2.1.1.1. Clock Network Hierarchy 2.1.1.2. Clock Sectors 2.1.1.3. Programmable Clock Routing
2.1.3. Clock Control Features x
2.1.3.1. Clock Gating 2.1.3.2. Clock Divider
2.1.3.1. Clock Gating x
2.1.3.1.1. Root Clock Gate 2.1.3.1.2. Sector Clock Gate 2.1.3.1.3. I/O PLL Clock Gate 2.1.3.1.4. LAB Clock Gate
2.2. PLLs Architecture and Features x
2.2.1. PLL Features 2.2.2. PLL Usage 2.2.3. PLL Locations 2.2.4. PLL Architecture 2.2.5. PLL Control Signals 2.2.6. PLL Feedback Modes 2.2.7. Clock Multiplication and Division 2.2.8. Programmable Phase Shift 2.2.9. Programmable Duty Cycle 2.2.10. PLL Cascading 2.2.11. PLL Input Clock Switchover 2.2.12. PLL Reconfiguration and Dynamic Phase Shift 2.2.13. PLL Calibration
2.2.5. PLL Control Signals x
2.2.5.1. Reset 2.2.5.2. Locked
2.2.6. PLL Feedback Modes x
2.2.6.1. Direct Compensation Mode 2.2.6.2. LVDS Compensation Mode 2.2.6.3. Source Synchronous Compensation Mode 2.2.6.4. Normal Compensation Mode 2.2.6.5. Zero-Delay Buffer Mode 2.2.6.6. External Feedback Mode
2.2.11. PLL Input Clock Switchover x
2.2.11.1. Automatic Switchover 2.2.11.2. Automatic Switchover with Manual Override 2.2.11.3. Manual Clock Switchover
2.2.13. PLL Calibration x
2.2.13.1. Power-Up Calibration 2.2.13.2. User Calibration 2.2.13.3. Static Phase Error Calibration 2.2.13.4. Output Clock Duty Cycle Correction
3. M-Series Clocking and PLL Design Considerations x
3.1. Guidelines: Clock Switchover 3.2. Guidelines: Timing Closure 3.3. Guidelines: Resetting the PLL 3.4. Guidelines: Configuration Constraints 3.5. Clocking Constraints 3.6. IP Core Constraints 3.7. Guideline: Achieving 5% Duty Cycle for fOUT_EXT ≥ 300 MHz Using tx_outclk Port from LVDS SERDES Intel® FPGA IP
4. Clock Control Intel® FPGA IP Core x
4.1. Release Information for Clock Control Intel® FPGA IP 4.2. Clock Control Intel® FPGA IP Core Parameters 4.3. Clock Control Intel® FPGA IP Core Ports and Signals
5. IOPLL Intel® FPGA IP Core x
5.1. Release Information for IOPLL Intel® FPGA IP 5.2. IOPLL IP Core Parameters 5.3. IOPLL IP Core Ports and Signals
5.2. IOPLL IP Core Parameters x
5.2.1. IOPLL IP Core Parameters - PLL Tab 5.2.2. IOPLL IP Core Parameters - Settings Tab 5.2.3. IOPLL IP Core Parameters - Cascading Tab 5.2.4. IOPLL IP Core Parameters - Advanced Parameters Tab
1. Agilex™ 7 FPGA M-Series Clocking and PLL Overview
2. M-Series Clocking and PLL Architecture and Features
3. M-Series Clocking and PLL Design Considerations
4. Clock Control Intel® FPGA IP Core
5. IOPLL Intel® FPGA IP Core
6. Agilex™ 7 Clocking and PLL User Guide: M-Series Archives
7. Document Revision History for the Agilex™ 7 Clocking and PLL User Guide: M-Series

2.2.13. PLL Calibration

I/O PLLs include both analog and digital blocks that require calibration to compensate for process, voltage, and temperature (PVT) variations. M-Series uses the I/O manager to perform calibration routines.

There are four main types of calibration.

  • Power-up calibration—initiates automatically at device power-up and runs during device configuration.
  • User calibration—if you perform dynamic reconfiguration or change the reference clock frequency of the I/O PLL, you must perform user recalibration. You must enable the required calibration sequence.
  • Static Phase Error Calibration—initiates after power up calibration to reduce phase error between reference clock and feedback clocks.
  • Output Clock Duty Cycle Correction—initiates after power up and static phase error calibration to measure and lower duty cycle error of specific output clocks. Lock signal is asserted after this operation completes.

To successfully complete the calibration process, OSC_CLK_1 clocks and all reference clocks driving the I/O PLLs must be stable and free running at the start of FPGA configuration. If clock switchover is enabled, both reference clocks must be present for calibration. During user mode, when the I/O PLL does not detect a reference clock during configuration, calibration attempts continue periodically. After calibration has completed, the I/O PLL is locked automatically.


Section Content
Power-Up Calibration
User Calibration
Static Phase Error Calibration
Output Clock Duty Cycle Correction

Level Two Title