E-Tile Hard IP Intel Agilex® 7 Design Example User Guide: Ethernet, E-tile CPRI PHY and Dynamic Reconfiguration

ID 683860
Date 8/08/2023
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.1.5. Testing the E-tile Dynamic Reconfiguration Hardware Design Example

The hardware information provided in the Running the Design Example in Hardware sub-sections is applicable for the following variants, only:
  • 10G/25G with PTP and optional RS-FEC
  • 10G/25G with optional RS-FEC
  • 10G/24G CPRI with optional RS-FEC
  • 9.8G CPRI
  • 25G Ethernet with PTP and optional RS-FEC to CPRI

For hardware information related to 100G Ethernet MAC+PCS with optional RS-FEC variant, refer to the 100GE DR Hardware Design Examples section.

After you compile the E-Tile Dynamic Reconfiguration Design Example and configure it on your device, you can use the Nios® II Software Build Tools (SBT) for Eclipse to compile and test the design in hardware.