E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

ID 683578
Date 3/06/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.5.3.1. 100GE MAC+PCS with Optional RS-FEC Dynamic Reconfiguration Simulation Design Example

The simulation block diagram below is generated using the following settings in the IP parameter editor:
  1. 100G Ethernet as DR Protocol.
  2. Under the 100G Ethernet Protocol tab:
    1. 100G Ethernet MAC+PCS RS-FEC as DR Design.
    2. Internal as DR Controller Location.
    3. Stratix 10 E-Tile TX Transceiver Signal Integrity Development Kit as the target development kit.
Figure 43. Simulation Block Diagram for 100GE MAC+PCS with Optional RS-FEC E-Tile Dynamic Reconfiguration Design Example

The testbench sends traffic through the IP core, exercising the transmit side and receive side of the IP core.

To speed up simulation, the IP core simulation model sends alignment marker tags at shorter intervals than required by the IEEE Ethernet standard. The standard specifies an alignment marker interval of 16,384 words in each virtual lane. The simulation model with the testbench implements an alignment marker interval of 512 words.

The successful test run displays output confirming the following behavior:

  1. The client logic resets the IP core.
  2. Waits for RX datapath to align.
  3. Once alignment is complete, client logic transmits a series of packets to the IP core.
  4. The client logic receives the same series of packets through RX MAC interface.
  5. The client logic then checks the number of packets received and verify that the data matches with the transmitted packets.
  6. Displaying Testbench complete.

The following sample output illustrates a portion of successful simulation test run for a 100GE, MAC+PCS without RS-FEC IP core variation.

# o_tx_lanes_stable is 1 at time             348403500
# waiting for tx_dll_lock....
# TX DLL LOCK is 1 at time             407396143
# waiting for tx_transfer_ready....
# TX transfer ready is 1 at time             407716015
# waiting for rx_transfer_ready....
# RX transfer ready is 1 at time             418791583
# EHIP PLD Ready out is 1 at time             418848000
# EHIP reset out is 0 at time             418992000
# EHIP reset ack is 0 at time             419070847
# EHIP TX reset out is 0 at time             419416000
# EHIP TX reset ack is 0 at time             470466959
# waiting for EHIP Ready....
# EHIP READY is 1 at time             470536467
# EHIP RX reset out is 0 at time             472496000
# waiting for rx reset ack....
# EHIP RX reset ack is 0 at time             472509994
# Waiting for RX Block Lock
# EHIP RX Block Lock  is high at time             503401281
# Waiting for AM lock
# EHIP RX AM Lock  is high at time             503401281
# Waiting for RX alignment             503401281
# RX deskew locked             503403000
# RX lane aligmnent locked
# ** Sending Packet           1...
# ...
# ** Received Packet         10...
#
# DR -> 100G NoFEC
# ** DR STARTING
#
# ===> writedata = 00000000 
# ===> writedata = 000000020 
# ===> writedata = 00010000  
# ===> writedata = 00000001 
# 
# ** RECONFIG CALLED, WAITING FOR DR
#
# ===>MATCH!     ReaddataValid = 1 Readdata = 00000001 Expected_Readdata = 00000001 
# ===>AVMM READ MISMATCH!     ReaddataValid = 1 Readdata = 00000001 Expected_Readdata = 00000000 
# ===>MATCH!     ReaddataValid = 1 Readdata = 00000000 Expected_Readdata = 000000000 
# 
# Reconfig Done
#
# ** RECONFIG DONE
#
# waiting for o_tx_lanes_stable...
# o_tx_lanes_stable is 1 at time             804564000
# waiting for tx_dll_lock....
# TX DLL LOCK is 1 at time             804564000
# waiting for tx_transfer_ready....
# TX transfer ready is 1 at time             804564000
# waiting for rx_transfer_ready....
# RX transfer ready is 1 at time             808135783
# EHIP PLD Ready out is 1 at time             808135783
# EHIP reset out is 0 at time             808135883
# EHIP reset ack is 0 at time             808135883
# EHIP TX reset out is 0 at time             808632000
# EHIP TX reset ack is 0 at time             808645131
# waiting for EHIP Ready....
# EHIP READY is 1 at time             808754358
# EHIP RX reset out is 0 at time             810672000
# waiting for rx reset ack....
# EHIP RX reset ack is 0 at time             810685684
# Waiting for RX Block Lock
# EHIP RX Block Lock  is high at time             813021645
# Waiting for AM lock
# EHIP RX AM Lock  is high at time             814548336
# Waiting for RX alignment             814548336
# RX deskew locked             815377000
# RX lane aligmnent locked
# ** Sending Packet           1...
# ...
# ** Received Packet         10...
# **
# ** Testbench complete.
# **
# *****************************************