E-tile Hard IP Intel® Stratix® 10 Design Examples User Guide: Ethernet, CPRI PHY, and Dynamic Reconfiguration

ID 683578
Date 3/06/2022
Public

A newer version of this document is available. Customers should click here to go to the newest version.

Document Table of Contents

4.2.3.2. 10GE/25GE MAC+PCS with RS-FEC Hardware Dynamic Reconfiguration Design Example Components

The 10GE/25GE hardware dynamic reconfiguration design example includes the following components:
  • E-Tile Hard IP for Ethernet Intel FPGA IP core.
  • Client logic that coordinates the programming of the IP core and packet generation.
  • Avalon® -MM address decoder to decode reconfiguration address space for MAC, transceiver, and RS-FEC modules during reconfiguration accesses.
  • Nios® II System that communicates with the Nios® II Software Build Tools (SBT) for Eclipse. You communicate with the client logic and E-Tile Hard IP for Ethernet Intel FPGA IP through the tool.
  • Native PHY in PMA Direct mode that acts as a channel PLL to provide EMIB clocks (for example, 402.8 MHz and 805.6 MHz), as required by the E-Tile Hard IP for Ethernet Intel FPGA IP core.
  • Triple-Speed Ethernet Intel FPGA IP
  • IO PLL to provide datapath clocks 62.5 MHz and 125 MHz as required by the Triple-Speed Ethernet Intel FPGA IP.
  • E-tile CPRI PHY EFIFO to handle the clock-crossing between the Triple-Speed Ethernet Intel FPGA IP and Native PHY's PMA.
  • ToD master module to provide a continuous flow of current time-of-day information to Triple-Speed Ethernet Intel FPGA IP.
  • Ethernet 1GE packet generator and monitor for Triple-Speed Ethernet Intel FPGA IP packet generation and monitoring.
The following sample outputs illustrate a successful hardware test run for a 25GE, MAC+PCS, RS-FEC IP core variation:
CPU is alive!


             Dynamic Reconfiguration Hardware Test

By default, the starting mode is 25G_FEC.
      Please choose one of Dynamic reconfiguration:
    0) 25G_noFEC -> 10G -> 25G_noFEC -> 25G_FEC -> 10G -> 25G_FEC -> 1G -> 10G -> 1G -> 25G_noFEC -> 1G -> 25G_FEC
    1) 25G_FEC   -> 25G_noFEC  
    2) 25G_noFEC -> 25G_FEC
    3) 25G_FEC   -> 10G
    4) 10G       -> 25G_FEC
    5) 25G_noFEC -> 10G
    6) 10G       -> 25G_noFEC
    7) 25G_FEC -> 1G
    8) 1G -> 25G_FEC
    9) 10G -> 1G
    A) 1G -> 10G
    b) 25G_noFEC -> 1G
    c) 1G 0 -> 25G_noFEC
    9) Terminate test
       If you terminate test halfway, you must reload the .sof file before retrigger the hardware test.

Enter a Valid Selection (0,1,3,7,d):