AN 773: Drive-On-Chip Design Example for Intel® MAX® 10 Devices

Download PDF
ID 683072
Date 7/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. About the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 2. Features of the Drive-on-Chip Design Example for Intel® MAX® 10 Devices 3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 5. About the Scaling of Feedback Signals 6. Motor Control Software 7. Functional Description of the Drive-on-Chip Design Example 8. Achieving Timing Closure on a Motor Control Design 9. Design Security Recommendations 10. Reference Documents for the Drive-on-Chip Design Example 11. Document Revision History for AN 773: Drive-on-Chip Design Example for Intel® MAX® 10 Devices
3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
3.1. Software Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.2. Hardware Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.3. Downloading and Installing the Design 3.4. Setting Up the Motor Control Board with your Development Board for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.5. Importing the Drive-On-Chip Design Example Software Project 3.6. Configuring the FPGA Hardware for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.7. Programming the Nios II Software to the Device for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.8. Applying Power to the Power Board 3.9. Debugging and Monitoring the Drive-On-Chip Design Example with System Console 3.10. System Console GUI Upper Pane for the Drive-On-Chip Design Example 3.11. System Console GUI Lower Pane for the Drive-On-Chip Design Example 3.12. Controlling the DC-DC Converter 3.13. Tuning the PI Controller Gains 3.14. Controlling the Speed and Position Demonstrations 3.15. Monitoring Performance
3.2. Hardware Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
3.2.1. Preparing the Rechargeable Battery
4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
4.1. Changing the Intel® MAX® 10 ADC Thresholds or Conversion Sequence 4.2. Generating the Qsys System 4.3. Compiling the Hardware in the Intel Quartus Prime Software 4.4. Generating and Building the Nios II BSP for the Drive-On-Chip Design Example 4.5. Software Application Configuration Files 4.6. Compiling the Software Application for the Drive-On-Chip Design Example 4.7. Programming the Design into Flash Memory
4.5. Software Application Configuration Files x
4.5.1. Defining a New Motor or Encoder Type
5. About the Scaling of Feedback Signals x
5.1. Signal Sensing in Sigma-Delta and MAX 10 Integrated ADCs 5.2. Signal Scaling in the Software of the Drive-on-Chip Design Example 5.3. Scale Factors for the Drive-on-Chip Design Example in the System Console Toolkit
6. Motor Control Software x
6.1. Viewing Motor Control Software Help Files
7. Functional Description of the Drive-on-Chip Design Example x
7.1. Processor Subsystem 7.2. Six-channel PWM Interface 7.3. DC Link Monitor 7.4. Drive System Monitor 7.5. Quadrature Encoder Interface 7.6. Sigma-Delta ADC Interface for Drive Axes 7.7. Intel® MAX® 10 ADCs 7.8. ADC Threshold Sink 7.9. DC-DC Converter 7.10. Motor Control Modes 7.11. FOC Subsystem 7.12. DEKF Technique 7.13. Signals 7.14. Registers
7.4. Drive System Monitor x
7.4.1. Drive System Monitor States for the Drive-on-Chip Design Example
7.6. Sigma-Delta ADC Interface for Drive Axes x
7.6.1. Offset Adjustment for Sigma-Delta ADC Interface
7.9. DC-DC Converter x
7.9.1. DC-DC Control Simulink Models 7.9.2. Sigma-Delta ADC Interface for DC-DC Converter
7.9.1. DC-DC Control Simulink Models x
7.9.1.1. DC-DC Control Block 7.9.1.2. Generating VHDL for the DSP Builder for Intel FPGAs Models for the DC-DC Converter
7.9.1.1. DC-DC Control Block x
7.9.1.1.1. DC-DC Model and VHDL Entity Signal Names and Data Format
7.11. FOC Subsystem x
7.11.1. DSP Builder for Intel FPGAs Model for the Drive-on-Chip Designs 7.11.2. Avalon Memory-Mapped Interface 7.11.3. About DSP Builder for Intel FPGAs 7.11.4. DSP Builder for Intel FPGAs Folding 7.11.5. DSP Builder for Intel FPGAs Model Resource Usage 7.11.6. DSP Builder for Intel FPGAs Design Guidelines 7.11.7. Generating VHDL for the DSP Builder Models for the Drive-on-Chip Designs
8. Achieving Timing Closure on a Motor Control Design x
8.1. Optimizing Motor Control Designs
1. About the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
2. Features of the Drive-on-Chip Design Example for Intel® MAX® 10 Devices
3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
5. About the Scaling of Feedback Signals
6. Motor Control Software
7. Functional Description of the Drive-on-Chip Design Example
8. Achieving Timing Closure on a Motor Control Design
9. Design Security Recommendations
10. Reference Documents for the Drive-on-Chip Design Example
11. Document Revision History for AN 773: Drive-on-Chip Design Example for Intel® MAX® 10 Devices

7.11.1. DSP Builder for Intel FPGAs Model for the Drive-on-Chip Designs

The top-level model is a simple dummy testbench with constant inputs of the correct arithmetic types to control hardware generation, which includes the FOC algorithm model.
Figure 44. DSP Builder for Intel FPGAs Model

The FOC algorithm comprises the FOC algorithm block and a latch block for implementing the integrators necessary for the PI controllers in the FOC algorithm. DSP Builder for Intel FPGAs implements the latches outside because of limitations of the folding synthesis.

The design includes fixed-point and floating-point models that implement the FOC algorithm. Only the fixed-point model has the SVM block. The design performs the SVM calculation in software for the floating-point models.

Each model calls a corresponding .m setup script during initialization to set up the arithmetic precision, folding factor, and target clock speed. The folding factor is set to a large value to minimize resource usage.

Table 17.  Default settings in Setup Script
Model Folding Factor Clock Speed (MHz) Input Precision Output Precision
Fixed point 500 100 sfix16En10 sfix32En10
Floating point 500 100 sfix32En10 sfix32En10

The following models generate the FOC block including the Avalon memory-mapped interface:

  • DFf_float_alu_av.slx for floating-point designs
  • DFf_fixp16_alu_av.slx for fixed-point designs

Verification models stimulate the FOC algorithm using dynamically changing inputs:

  • verify_DF_float_alu.slx
  • verify_DF_fixp16_alu.slx

Closed-loop simulation models validate that the FOC correctly controls a motor in simulation:

  • sim_DF_float_alu.slx
  • sim_DF_fixp16_alu.slx

A Simulink library model contains the main FOC algorithm code, which the other models refer to:

  • foc_blocks.slx
Level Two Title