AN 773: Drive-On-Chip Design Example for Intel® MAX® 10 Devices

Download PDF
ID 683072
Date 7/26/2023
Public
Document Table of Contents
Document Table of Contents x
1. About the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 2. Features of the Drive-on-Chip Design Example for Intel® MAX® 10 Devices 3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 5. About the Scaling of Feedback Signals 6. Motor Control Software 7. Functional Description of the Drive-on-Chip Design Example 8. Achieving Timing Closure on a Motor Control Design 9. Design Security Recommendations 10. Reference Documents for the Drive-on-Chip Design Example 11. Document Revision History for AN 773: Drive-on-Chip Design Example for Intel® MAX® 10 Devices
3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
3.1. Software Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.2. Hardware Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.3. Downloading and Installing the Design 3.4. Setting Up the Motor Control Board with your Development Board for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.5. Importing the Drive-On-Chip Design Example Software Project 3.6. Configuring the FPGA Hardware for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.7. Programming the Nios II Software to the Device for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices 3.8. Applying Power to the Power Board 3.9. Debugging and Monitoring the Drive-On-Chip Design Example with System Console 3.10. System Console GUI Upper Pane for the Drive-On-Chip Design Example 3.11. System Console GUI Lower Pane for the Drive-On-Chip Design Example 3.12. Controlling the DC-DC Converter 3.13. Tuning the PI Controller Gains 3.14. Controlling the Speed and Position Demonstrations 3.15. Monitoring Performance
3.2. Hardware Requirements for the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
3.2.1. Preparing the Rechargeable Battery
4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices x
4.1. Changing the Intel® MAX® 10 ADC Thresholds or Conversion Sequence 4.2. Generating the Qsys System 4.3. Compiling the Hardware in the Intel Quartus Prime Software 4.4. Generating and Building the Nios II BSP for the Drive-On-Chip Design Example 4.5. Software Application Configuration Files 4.6. Compiling the Software Application for the Drive-On-Chip Design Example 4.7. Programming the Design into Flash Memory
4.5. Software Application Configuration Files x
4.5.1. Defining a New Motor or Encoder Type
5. About the Scaling of Feedback Signals x
5.1. Signal Sensing in Sigma-Delta and MAX 10 Integrated ADCs 5.2. Signal Scaling in the Software of the Drive-on-Chip Design Example 5.3. Scale Factors for the Drive-on-Chip Design Example in the System Console Toolkit
6. Motor Control Software x
6.1. Viewing Motor Control Software Help Files
7. Functional Description of the Drive-on-Chip Design Example x
7.1. Processor Subsystem 7.2. Six-channel PWM Interface 7.3. DC Link Monitor 7.4. Drive System Monitor 7.5. Quadrature Encoder Interface 7.6. Sigma-Delta ADC Interface for Drive Axes 7.7. Intel® MAX® 10 ADCs 7.8. ADC Threshold Sink 7.9. DC-DC Converter 7.10. Motor Control Modes 7.11. FOC Subsystem 7.12. DEKF Technique 7.13. Signals 7.14. Registers
7.4. Drive System Monitor x
7.4.1. Drive System Monitor States for the Drive-on-Chip Design Example
7.6. Sigma-Delta ADC Interface for Drive Axes x
7.6.1. Offset Adjustment for Sigma-Delta ADC Interface
7.9. DC-DC Converter x
7.9.1. DC-DC Control Simulink Models 7.9.2. Sigma-Delta ADC Interface for DC-DC Converter
7.9.1. DC-DC Control Simulink Models x
7.9.1.1. DC-DC Control Block 7.9.1.2. Generating VHDL for the DSP Builder for Intel FPGAs Models for the DC-DC Converter
7.9.1.1. DC-DC Control Block x
7.9.1.1.1. DC-DC Model and VHDL Entity Signal Names and Data Format
7.11. FOC Subsystem x
7.11.1. DSP Builder for Intel FPGAs Model for the Drive-on-Chip Designs 7.11.2. Avalon Memory-Mapped Interface 7.11.3. About DSP Builder for Intel FPGAs 7.11.4. DSP Builder for Intel FPGAs Folding 7.11.5. DSP Builder for Intel FPGAs Model Resource Usage 7.11.6. DSP Builder for Intel FPGAs Design Guidelines 7.11.7. Generating VHDL for the DSP Builder Models for the Drive-on-Chip Designs
8. Achieving Timing Closure on a Motor Control Design x
8.1. Optimizing Motor Control Designs
1. About the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
2. Features of the Drive-on-Chip Design Example for Intel® MAX® 10 Devices
3. Getting Started with the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
4. Rebuilding the Drive-On-Chip Design Example for Intel® MAX® 10 Devices
5. About the Scaling of Feedback Signals
6. Motor Control Software
7. Functional Description of the Drive-on-Chip Design Example
8. Achieving Timing Closure on a Motor Control Design
9. Design Security Recommendations
10. Reference Documents for the Drive-on-Chip Design Example
11. Document Revision History for AN 773: Drive-on-Chip Design Example for Intel® MAX® 10 Devices

5.1. Signal Sensing in Sigma-Delta and MAX 10 Integrated ADCs

The Drive-On-Chip Design Example for Intel® MAX® 10 devices configures the Intel® MAX® 10 ADCs as a dual ADC with sequencer and sample store using the internal 2.5 V reference. It uses 16 channels, channels 1 to 8 on each of the ADC submodules.

Each Intel® MAX® 10 ADC submodule converts the 8 input channels in sequence. The Intel® MAX® 10 ADC Qsys component configures the sequence. Intel chooses the order in which the design connects signals to the ADC inputs. Also, Intel chooses the sequence in the Qsys component to minimize the time difference between the most recent feedback current samples for motor control.

Sigma-delta modulators on the power board convert analog signals to a one-wire digital bitstream. The design demodulates or filters the bitstream in the FPGA. The FPGA uses two types of sigma-delta filter IP in the FPGA, ADC modules and DC link modules, each with different scaling and offset.

The design downloads and filters all sigma delta inputs in parallel so no skew exists between the samples that it feeds to the software application.

Each ADC type has a different input and output ranges with the corresponding 'C' data type..

Table 5.  ADC Output Data
ADC Type Input Range Count Range C Data type
Sigma-delta ADC -320…+320mV -32768…+32767 Signed 16-bit
Sigma-delta DC link 0…+320mV 0…+32767 Unsigned 16-bit
MAX 10 0…2.5V 0…4097 Unsigned 16-bit

The input current and DC bus current are only available via sigma-delta ADCs.

Position feedback samples are scaled to a 23 bit unsigned integer, for consistency across all encoder types supported by this and previous Drive-On-Chip reference designs.

Table 6.  ADC ScalingThis table shows the ADC scaling for all signals, ADC type and board revision. The scaling depends on the way the power board processes the signals (e.g., value of current shunts, scaling, and offset in sense amplifiers).
Feedback Quantity Sigma Delta Interface IP Sigma Delta Scaling for Tandem Motion Power Board Intel® MAX® 10 Scaling for Tandem Motion Power Board
Motor Phase Voltages ADC interface 545 counts/V 67.7 counts/V
DC Bus Voltage ADC interface 40 counts/V 67.7 counts/V
Input Voltage DC Link 895 counts/V 223 counts/V
Input Current DC Link 256 counts/A N/A
DC-DC Inductor Current ADC interface 717 counts/A 57.3 counts/A
DC Bus Current DC Link 1638 counts/A N/A
Motor Phase Currents ADC interface 1024 counts/A 81.9 counts/A
Level Two Title